Key specifications
- Type
- Hot/Cold Shelf
- Style
- Flush Top
- Installation Type
- Built-In
- Material
- Simulated Stone
- Country of Origin
- USA
- Size
- 24 in
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Hatco HCSSBFR-24-S is a built-in flush-top hot/cold simulated stone shelf with a 24 in x 24 in usable heated and cooled surface. Electronic temperature controls support transitions between heated and cold operation.
The remote refrigeration configuration includes the condensing unit and electronic control box, shipped loose. The bottom-mounted shelf sits flush with the countertop and uses R-513A refrigerant.
- Overall dimensions: 27 in W x 27 in D x 7.52 in H
- Approximate weight: 142 lb
- cULus and Made in USA
Overall Dimensions:
27.0"W x 27.0"D x 7.52"HProduct Weight:
142.0 lbHot/Cold Operation
The shelf transitions from heated to cold operation or from cold to heated operation in as little as 30 minutes.
Built-In Flush Top
The bottom-mounted unit is designed to sit flush with the countertop.
Electronic Temperature Control
The electronic temperature control box includes a 4 ft lead wire.
Remote Refrigeration
The HCSSBFR configuration includes an unattached condensing unit and control box shipped loose.
Simulated Stone Surface
The shelf assembly uses a simulated stone surface.
Thermal Break
A thermal break reduces condensation and temperature transfer on adjacent surfaces.
R-513A Refrigerant
The HCSSBFR configuration uses R-513A refrigerant.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.