Key specifications
- Phase
- 1-Phase
- Dimensions
- 88.0"W × 28.0"D × 36.0"H
- Type
- Cold Food Counter
- Style
- Mobile
- Installation Type
- Floor Model
- Material
- Stainless Steel
Dinex DineXpress DXP6CM Mobile Mechanically Cooled 6-Pan Counter
- Mechanically cooled
- Ice-cooled
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The DineXpress DXP6CM is a mobile, mechanically cooled cold food counter for chilled food service. It provides six 12 x 20 pan positions in enclosed 5-inch-deep wells.
The unit features a stainless steel top, front and removable end panels, standard sliding doors, an undershelf, a 1-inch drain with shut-off valve, and 5-inch swivel plate casters with two brakes.
- Fan-cooled condensing unit with 1/3 hp compressor
- 120-volt, single-phase electrical connection with 8-foot cord and NEMA 5-15P plug
- On/off switch and pilot light
Overall Dimensions:
88.0"W x 28.0"D x 36.0"HProduct Weight:
385.0 lbMechanical Cooling
A fan-cooled condensing unit with a valve pressure control switch and 1/3 hp compressor provides mechanical cooling.
Six-Pan Capacity
The counter accommodates six 12 x 20 pans in enclosed 5-inch-deep wells.
Stainless Steel Construction
The top is 14-gauge stainless steel, while the front and removable end panels are 20-gauge stainless steel.
Sliding Doors
Sliding doors are standard for the unit.
Mobile Base
The unit uses 5-inch swivel plate casters, with two casters equipped with brakes.
Drain and Undershelf
A 1-inch drain with shut-off valve and an undershelf are included.
Electrical Controls
The unit includes an on/off switch, pilot light, 8-foot electrical cord, and NEMA 5-15P plug.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.