Key specifications
- Phase
- 1-Phase
- Dimensions
- 32.0"W × 28.0"D × 36.0"H
- Type
- Cold Food Counter
- Installation Type
- Floor Model
- Material
- Stainless Steel
- Refrigeration Type
- Mechanically Cooled
Dinex DineXpress DXP2CM 2-Pan Mechanically Cooled Food Counter
- Mechanically cooled
- Ice-cooled
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Dinex DXP2CM is a mechanically cooled mobile cold food counter with capacity for two 12 x 20 in pans in 5 in deep enclosed wells.
It features a stainless steel top, stainless steel front and removable end panels, standard sliding doors, an undershelf, a 1 in drain with shut-off valve, and a fan-cooled condensing unit with a 1/3 hp compressor.
- Overall dimensions: 32 in W x 28 in D x 36 in H
- 120V single-phase electrical service with 8 ft cord and NEMA 5-15P plug
- 5 in swivel plate casters, including two with brakes
Overall Dimensions:
32.0"W x 28.0"D x 36.0"HProduct Weight:
225.0 lbMechanically cooled refrigeration
Fan-cooled condensing unit with valve pressure control switch and 1/3 hp compressor.
Two-pan capacity
Accommodates two 12 x 20 in pans in 5 in deep enclosed wells.
Stainless steel construction
Includes a 14-gauge stainless steel top and 20-gauge stainless steel front and removable end panels.
Sliding doors
Sliding doors are standard on the mechanically cooled unit.
Mobile base
5 in swivel plate casters are supplied, with two casters equipped with brakes.
Drain
1 in drain with shut-off valve.
Controls and indicator
On/off switch and pilot light are mounted on the control panel.
Condensing unit ventilation
Louvered panel provides ventilation for the condensing unit.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.