Key specifications
- Amps
- 6.3 Amps
- Phase
- 1-Phase
- Dimensions
- 32.0"W × 28.0"D × 36.0"H
- Type
- Cold Food Counter
- Style
- Extra Deep
- Installation Type
- Floor Model
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The DXP2BCM is a mobile, mechanically cooled cold food counter with capacity for two 12 x 20-inch pans in a 9-7/16-inch-deep well.
It features a stainless steel top and panels, a modular interlocking mechanism, and 5-inch swivel plate casters with two brakes.
- 120-volt, single-phase operation with an 8-foot cord and NEMA 5-15P plug.
- On/off switch and pilot light are mounted on the operator-side control panel.
- NSF/ANSI Standard 7 compliance and UL certification are specified.
Overall Dimensions:
32.0"W x 28.0"D x 36.0"HProduct Weight:
320.0 lbMechanical Cooling
Mechanically refrigerated design requires no ice.
Extra-Deep Well
The cold well is 9-7/16 inches deep.
Pan Capacity
Accommodates two 12 x 20-inch pans.
Stainless Steel Construction
The unit has a 14-gauge stainless steel top with stainless steel front and end panels.
Mobile Design
The counter has 5-inch swivel plate casters, with two casters equipped with brakes.
Interlocking Mechanism
The modular unit can interlock with other Dinex units.
Controls
An on/off switch and pilot light are mounted on the operator side.
Drain
A 1-inch drain with shut-off valve is located below the unit on the operator's left side.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.