Key specifications

Dimensions
86 in × 32 in × 75 in
Type
Conveyor Dishwasher
Style
Corner Load
Installation Type
Floor Model
Material
Stainless Steel
Finish
No. 4 Mill Finish
Spec sheet
Stero SKU: ER76SC

Stero ER76SC Corner-Load Power Scrapper Conveyor Dishwasher

$109,660.80
/each
Estimated to ship in 16–19 business days
Tank heat
Electrical
Operation direction
Included: Stero warranty One year from initial startup or 18 months from factory shipment, whichever comes first

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $10,144/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Conveyor Dishwasher
Style Corner Load
Installation Type Floor Model
Material Stainless Steel
Finish No. 4 Mill Finish
Capacity 223 Racks/Hour
Opening Width 21 in
Tank Design 2 Tank With Scrapper
Temperature High Temp
Booster Heater Without Booster
Tank Heat To Be Specified
Door Type Insulated Cabinet Style
Rinse Water Usage 0.52 Gallons/Rack
Final Rinse Flow 2.43 GPM
Wash Pump Motor 2 HP
Scrapper Pump Motor 1 HP
Wash Pump Flow 225 GPM
Conveyor Motor 1/4 HP
Inspection Doors 2
Energy Efficiency ENERGY STAR
Width 86 in
Depth 32 in
Height 75 in
Weight 1,450 lb

Description

The Stero ER76SC is a two-tank conveyor dishwasher with a 32 in corner-load power scrapper, high-temperature operation without a booster, and throughput of 223 racks per hour.

Automatic fill, rack-activated starting, automatic shutdown, and a recirculating 2 HP wash system support continuous dishwashing operation. Stainless steel construction and insulated cabinet-style doors are specified for the SC configuration.

  • The power scrapper strips food soil before the wash cycle.
  • Final rinse usage is listed at 0.52 gallons per rack.
  • Tank heat must be specified for the installation.

Product Weight:

1450.0 lb

Corner-Load Power Scrapper

The 32 in power scrapper strips food soil before the wash cycle.

Conveyor Wash System

A two-tank design combines power scrapping, recirculated washing, and a fresh-water final rinse.

Automatic Operation

Automatic fill maintains tank levels, rack activation starts the conveyor and pumps, and automatic shutdown stops operation during idle periods.

Water-Saving Rinse

The final rinse is listed at 2.43 GPM and 0.52 gallons per rack.

Recirculating Wash Motor

The wash system uses a 2 HP motor with a listed flow of 225 GPM.

High-Temperature Operation

The specified configuration is high temperature without a booster; tank heat must be specified.

Stainless Steel Construction

The tank and hood use 300 series No. 4 mill finish stainless steel, with a stainless steel front enclosure panel.

Cabinet-Style Doors

Insulated cabinet-style doors are specified for the SC configuration.

Safety and Access

Two inspection doors provide access, and door safety switches prevent operation when a door is open.

Frequently Asked Questions

The conveyor dishwasher is specified at 223 racks per hour.
Yes. It has a 32 in corner-load power scrapper with a 1 HP recirculating motor.
The specified configuration is high temperature without a booster. The cutsheet lists booster heaters as separate options.
Tank heat must be specified. The cutsheet documents electric and steam tank-heating options.
The cutsheet lists 208, 240, and 480 volt, 60 Hz, 3-phase configurations; the required voltage must be specified.
The ER76SC is listed with ENERGY STAR, NSF, and cULus certifications.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030