Key specifications

Type
Conveyor Dishwasher
Style
Corner Load
Installation Type
Floor Model
Material
Stainless Steel
Capacity
270 Racks/Hour
Tank Count
3
Spec sheet
Stero SKU: ER94SC

Stero ER94SC Commercial Conveyor Dishwasher, 36-Inch Corner-Load Power Scrapper, 3-Tank Pre-Wash, High-Temperature, 270 Racks/Hour

$150,871.20
/each
Estimated to ship in 16–19 business days
Power scrapper
Tank heat
Electrical
Operation direction
Booster heater
Included: Stero warranty One year from initial startup or 18 months from factory shipment, whichever comes first, for defects in material and workmanship under normal use and operation

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $13,956/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Conveyor Dishwasher
Style Corner Load
Installation Type Floor Model
Material Stainless Steel
Capacity 270 Racks/Hour
Tank Count 3
Tank Design 3-Tank With Pre-Wash
Temperature Range High Temperature Without Booster
Final Rinse Fresh Water
Door Style Insulated Cabinet Style
Wash Motor 2 HP
Rinse Motor 2 HP
Scrapper Motor 1 HP
Conveyor Motor 1/4 HP
Energy Efficiency ENERGY STAR

Description

Stero ER94SC is a conveyor dishwasher with a 36-inch corner-load power scrapper and a three-tank high-temperature wash system. It is specified for 270 racks per hour and high-temperature operation without a booster.

The machine includes automatic fill, a shutdown timer, fresh-water rinse, insulated cabinet-style doors, and stainless steel construction for the front panel, tank, and hood.

  • 2 HP recirculated power wash and 2 HP recirculated power rinse
  • 1 HP power scrapper and 1/4 HP conveyor drive
  • KIT 55

Product Weight:

1800.0 lb

Corner-Load Power Scrapper

The 36-inch power scrapper provides a pre-wash stage in the conveyor path.

Three-Tank Design

The system includes pre-wash, power wash, and power rinse tanks, followed by a fresh-water rinse.

High-Temperature Operation

The product is specified for high-temperature operation without a booster.

Automatic Fill

Automatic fill maintains proper tank levels.

Shutdown Timer

The automatic shutdown feature stops operation during idle periods.

Fresh-Water Rinse

A fresh-water rinse follows the recirculated wash and rinse stages.

Conveyor Drive

The conveyor is powered by a 1/4 HP motor.

Stainless Steel Construction

The front panel, tank, and hood are specified as stainless steel.

Frequently Asked Questions

The ER94SC is specified at 270 racks per hour.
The provided product attributes specify high-temperature operation without a booster.
It includes a pre-wash power scrapper, power wash, power rinse, and a fresh-water final rinse.
The listed certifications are ENERGY STAR, NSF, and cULus.
Stero warrants the equipment against defects in material and workmanship for one year from initial startup or 18 months from factory shipment, whichever comes first.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030