Key specifications

Phase
3-Phase
Type
Conveyor Dishwasher
Installation Type
Floor Model
Material
Stainless Steel
Finish
No. 4 Mill Finish
Capacity
268 Racks/Hour
Spec sheet
Stero SKU: ER64

Stero ER64 2-Tank Conveyor Dishwasher Without Pre-Wash

$106,839.60
/each
Estimated to ship in 16–19 business days
Tank heat
Voltage
Operation direction
Doors
Included: Stero warranty One year from initial startup or 18 months from factory shipment, whichever comes first

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $9,883/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Conveyor Dishwasher
Installation Type Floor Model
Material Stainless Steel
Finish No. 4 Mill Finish
Capacity 268 Racks/Hour
Tank Count 2 Tanks
Tank Design Without Pre-Wash
Temperature Range High Temperature Without Booster
Rinse Type Fresh Water
Controls Automatic Fill, Rack-Activated Start, Shut-Down Timer
Wash Motor 2 HP
Rinse Motor 2 HP
Conveyor Motor 1/4 HP
Wash Pump Flow 225 GPM
Rinse Pump Flow 225 GPM
Rack Width 20 in
Hertz 60 Hz
Phase 3-Phase
Energy Efficiency ENERGY STAR

Description

ER64 is a high-temperature conveyor dishwasher with two recirculated wash and rinse tanks, a fresh-water final rinse, and a 64-inch machine length. The listed capacity is 268 racks per hour, with a two-tank layout without pre-wash.

Automatic fill maintains tank levels, while rack-activated starting, an automatic shut-down function, and a rack-activated final rinse support operation. The machine includes stainless steel components including the front enclosure panel, tank, hood, frame, internal piping, fittings, risers, and manifolds.

  • 2 HP recirculated wash motor and 2 HP recirculated rinse motor
  • Integral 1/4 HP conveyor motor
  • 20-inch rack conveyor design
  • ENERGY STAR, NSF, and cULus certifications

Product Weight:

1000.0 lb

Two-Tank Design

The ER64 has two wash and rinse tanks and is specified without a pre-wash tank.

Fresh-Water Final Rinse

A rack-activated final rinse uses fresh water.

Automatic Fill

Automatic fill maintains proper tank levels.

Automatic Start and Shut-Down

A rack-activated switch starts the conveyor and pumps, while automatic shut-down stops operation during idle periods.

Recirculated Wash and Rinse

Separate 2 HP wash and rinse motor assemblies recirculate water at 225 GPM.

Conveyor Drive

An integral 1/4 HP motor powers the conveyor.

Stainless Steel Construction

The front enclosure panel, tank, hood, frame, internal piping, fittings, risers, and manifolds are stainless steel.

Door Safety

Door safety switches prevent operation when a door is open and shut the machine off if a door opens while running.

Frequently Asked Questions

No. The catalog identifies it as a two-tank conveyor dishwasher without pre-wash.
The authoritative product specification lists a capacity of 268 racks per hour.
It uses a fresh-water final rinse activated by the rack.
Yes. The product data identifies the ER64 as a high-temperature dishwasher without a booster.
The equipment is warranted against defects in material and workmanship for one year from initial startup or 18 months from factory shipment, whichever comes first.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030