Key specifications

Type
Conveyor Dishwasher
Installation Type
Floor Model
Material
Stainless Steel
Finish
No. 4 Mill Finish
Compartments
2 Tanks
Rack Capacity
309 Racks/Hour
Spec sheet
Stero SKU: SCT-76

Stero SCT-76 Conveyor Dishwasher, High Temperature, 2-Tank, 309 Racks/Hour, Stainless Steel

$110,799.60
/each
Estimated to ship in 16–19 business days
Tank heatRequired
ElectricalRequired
Operation directionRequired
Rinse booster
Conveyor operation

Need something else? Contact us.

Included: Stero warranty One year from the date of initial startup or 18 months from the date of shipment from the factory, whichever comes first, under normal use and operation

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $10,249/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Conveyor Dishwasher
Installation Type Floor Model
Material Stainless Steel
Finish No. 4 Mill Finish
Compartments 2 Tanks
Rack Capacity 309 Racks/Hour
Temperature High Temperature Without Booster
Final Rinse Temperature 180°F
Length 76 Inches
Wash Motor Power 2 HP
Rinse Motor Power 2 HP
Conveyor Motor Power 1/4 HP
Wash Flow Rate 225 GPM
Rinse Flow Rate 225 GPM

Description

The Stero SCT-76 is a floor-model, high-temperature conveyor dishwasher with two tanks and a 76-inch length.

It is specified for 309 racks per hour and includes automatic fill, rack-activated conveyor and pump start, automatic shutdown during idle periods, recirculated wash and rinse, and a fresh-water 180°F final sanitizing rinse.

  • Stainless steel tank, hood, frame, front enclosure panel, piping, fittings, risers, and manifolds
  • Two large inspection doors and a door safety switch
  • 2 HP wash and rinse motors with 225 GPM recirculated flow
  • 1/4 HP conveyor motor with center-drive stainless steel pawl bar

Product Weight:

1200.0 lb

High-Temperature Operation

The authoritative category data identifies the dishwasher as high temperature without a booster.

Two-Tank Design

The machine has two tanks and is specified without a pre-wash section.

Automatic Fill

Automatic fill maintains proper tank levels.

Rack-Activated Start

A rack-activated switch starts the conveyor and pumps.

Automatic Shutdown

The shutdown function stops operation during idle periods.

Recirculated Wash and Rinse

The dishwasher uses recirculated wash and rinse with 2 HP motors and 225 GPM flow for each.

Fresh-Water Final Rinse

A fresh-water 180°F final sanitizing rinse is specified.

Stainless Steel Construction

The tank, hood, frame, front enclosure panel, internal piping, fittings, risers, and manifolds are identified as stainless steel.

Door Safety Switch

The safety switch prevents operation when an inspection door is open and shuts the machine off if a door is opened during operation.

Frequently Asked Questions

The SCT-76 is specified at 309 racks per hour.
It has two tanks and is specified without a pre-wash section.
It uses a fresh-water 180°F final sanitizing rinse.
Yes. Automatic fill maintains proper tank levels.
Yes. A rack-activated switch starts the conveyor and pumps.
A door safety switch prevents operation if an inspection door is open and shuts the machine off if a door is opened during operation.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030