Key specifications
- Dimensions
- 102.0"W × 25.0"D × 75.5"H
- Type
- Conveyor Dishwasher
- Style
- Rack Conveyor
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Capacity
- Approximately 287 Racks/Hour
Jackson WWS AJ-86CS 2-Tank High-Temp Conveyor Dishwasher
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Jackson WWS AJ-86CS is a high-temperature conveyor dishwasher with steam coil tank heat, a two-tank wash and power-rinse design, and a recirculating prewash section.
Adjust-A-Peak conveyor speed can be manually set from 144 to 287 racks per hour. The machine provides 25-inch clearance, stainless steel construction, automatic fill, and high-temperature sanitizing with a fresh-water final rinse.
- Capacity: Approximately 287 racks per hour.
- Tank heating: Steam coil heating for the wash and power-rinse tanks.
- Construction: 304 stainless steel components.
- Clearance: 25 inches through the machine.
Overall Dimensions:
102.0"W x 25.0"D x 75.5"HProduct Weight:
1040.0 lbHigh-Temperature Sanitizing
Fresh-water final rinse is specified at 180-195°F for high-temperature sanitizing.
Adjust-A-Peak Conveyor Speed
Manual conveyor adjustment allows operation from 144 racks per hour to the maximum capacity of 287 racks per hour.
Recirculating Prewash
A recirculating prewash section precedes the wash and rinse sections.
Steam Coil Tank Heat
Stainless steel steam coils heat the wash and power-rinse tanks.
Energy Guard Controls
The prewash, wash, recirculating rinse and final rinse sections operate when a rack is in place.
Automatic Operation
Fully automatic operation includes automatic tank filling.
Stainless Steel Construction
The machine uses 304 series stainless steel components.
Vent Cowls and Splash Shields
Standard 8-inch vent cowls and splash shields are provided at the wash and rinse ends.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.