Moffat

Moffat VH35-26 Ventless Condensing Hood for Turbofan E35D6-26/E35T6-26 Convection Ovens

SKU: VH35-26
$8,002.00
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Moffat VH35-26 Ventless Condensing Hood for Turbofan E35D6-26/E35T6-26 Convection Ovens

3-Stage Filtration, Self-Contained Condensate Collection

Capture grease and odors without ductwork thanks to a self-contained ventless hood built for compatible Turbofan ovens.

  • Eliminates the need for a canopy or ducted oven hood.
  • Designed for Turbofan E35D6-26 and E35T6-26 convection ovens.
  • 3-stage filtration includes grease baffle, mesh particle, and replaceable charcoal filters.
  • Self-contained condensate collection with optional remote drain connection.
  • Automatic 2-speed extraction fans adjust for idle, cooking, and door-open conditions.
  • 304 stainless steel construction with oven interlock and illuminated power switch.

Ventless Condensing Design

Removes the need for installation of a canopy or ducted oven hood.

Three-Stage Filtration

Uses grease baffle filters, mesh particle filters, and a replaceable charcoal odor filter.

Condensing Heat Exchanger

Helps reduce heat emissions from the oven vent during operation.

Self-Contained Condensate Collection

Condensate drains to a collection pan below the oven, so a waste drain connection is not required.

Optional Remote Drain Setup

Condensate can be routed to a permanent waste drain if a field drain connection is preferred.

Oven Interlocked Operation

The oven will not operate unless the hood is turned on, adding a safety and control interlock.

Automatic 2-Speed Extraction Fans

Low speed is used during idle or cooking, with automatic high speed before cycle end and when the oven door opens.

304 Stainless Steel Construction

Built with a welded casing and stainless steel service panels for durability and easy maintenance.

Included Installation Kit

Supplied with an installation kit for connection and fitment to compatible Turbofan ovens and stand arrangements.

Type Ventless Hood
Style Condensing
Material 304 Stainless Steel
Finish Stainless Steel
Voltage 110-120 Volts
Amps 2.0 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 6 Feet
Water Connection Not Required
Drain Connection Not Required
Country of Origin USA
Selling Unit Each
Units Per Case 1
Shipping Width 38 Inches
Shipping Depth 45 Inches
Shipping Height 21 1/2 Inches
Shipping Weight 190 Pounds

Frequently Asked Questions

It is designed for Turbofan E35D6-26 and E35T6-26 convection ovens.
No. The ventless design removes the need for a canopy or ducted oven hood.
No water connection is required, and condensate collection is self-contained. A remote drain option is available if desired.
The hood operates on 110-120V, 60 Hz, 1-phase power at 2.0A and comes with a NEMA 5-15P, 6-foot cordset.
It uses a 3-stage filtration system with removable grease baffle filters, removable mesh particle filters, and a replaceable charcoal filter.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.