Key specifications

Amps
1.0 Amps
Phase
1-Phase
Dimensions
32.25"W × 33.5"D × 14.38"H
Type
Ventless Hood
Style
Condensing
Material
304 Stainless Steel
Spec sheet
Moffat SKU: VH31

Moffat VH31 Ventless Condensing Hood for E31D4

$7,052.64
/each
Estimated to ship in 15–18 business days Free Shipping
Condensate drainage
Included: Moffat warranty 1-year warranty against defects in material and workmanship

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $652/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Ventless Hood
Style Condensing
Material 304 Stainless Steel
Country of Origin USA
Finish Stainless Steel
Filter Stages 3-Stage
Condensate Collection Self-Contained
Water Connection Not Required
Drain Requirement Optional
Controls Illuminated Power Switch; Oven Interlock
Extraction Fan Automatic 2-Speed
Voltage 110-120 Volts
Amps 1.0 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 6 ft

Description

The Moffat VH31 is a ventless condensing hood designed for the Turbofan E31D4 convection oven. It combines a condensing heat exchanger with three-stage filtration in an all-stainless-steel welded casing.

  • Three-stage filtration includes removable grease baffle and mesh filters plus a replaceable charcoal filter.
  • Self-contained condensate collection eliminates the need for a water connection or waste drain connection.
  • An optional drain hose can route condensate to a permanent waste drain.
  • Automatic two-speed extraction operates with oven interlock control.
  • The illuminated power switch and oven interlock help coordinate hood and oven operation.

Overall Dimensions:

32.25"W x 33.5"D x 14.38"H

Product Weight:

150.0 lb

Three-Stage Filtration

Includes a removable grease baffle filter, removable mesh particle filter, and replaceable charcoal odour filter.

Condensing Heat Exchanger

Condenses oven vent emissions and reduces heat emissions.

Self-Contained Condensate Collection

Condensate drains to a collection pan below the oven, so no waste drain connection is required.

Optional Remote Condensate Drain

The supplied drain hose can route condensate to a permanent waste drain if desired.

Oven Interlock

The oven will not operate if the hood is not turned on, and the oven control provides an alarm notification if the hood is not operating.

Automatic Two-Speed Extraction

The fan uses low speed during idle or cooking and automatically increases speed before the end of a cook or bake program and when the oven door is opened.

Stainless Steel Construction

304 stainless steel welded casing with top and rear service panels.

Illuminated Power Switch

The hood includes an illuminated power switch.

Frequently Asked Questions

It is provided for connection and fitment to the Moffat Turbofan E31D4 convection oven.
No. The specifications state that no water connection is required.
No. Condensate collects in a self-contained pan. An optional drain hose can route condensate to a permanent waste drain.
It uses three-stage filtration with a removable grease baffle filter, removable mesh particle filter, and replaceable charcoal odour filter.
The hood requires 110-120 Volts, 60 Hz, single-phase power at 1.0 Amps and uses a NEMA 5-15P cordset.
The external dimensions are 32.25 inches wide, 33.5 inches deep, and 14.38 inches high.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030