Key specifications

BTU
2,600 BTU
Amps
6.1 Amps
Phase
1-Phase
Dimensions
93.0"W × 30.0"D × 42.0"H
Type
Sandwich Prep Table
Style
Shallow Depth
Spec sheet

Continental Refrigerator RA93SN8 Refrigerated Prep Table

$8,738.53
/each
Estimated to ship in 4–7 business days Free Shipping
Size
ElectricalRequired
Storage sections
Section above condensing unit
Lid
Overshelf

Need something else? Contact us.

Included: Continental Refrigerator warranty Six-year parts and labor warranty, plus an additional one-year parts-only warranty for the hermetically sealed R-290 compressor

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $808/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Sandwich Prep Table
Style Shallow Depth
Installation Type Floor Model
Material Stainless Steel
Top Material Stainless Steel
Interior Material Aluminum
Rear Material Galvanized Steel
Finish Stainless Steel
Capacity 25.6 cu ft
Pan Size 1/6 Size
Pan Depth 4 in
Pan Capacity 8 Pans
Shelf Count 6
Sections 4
Door Count 4
Door Configuration 3 Full, 1 Half
Access Type Doors
Voltage 115 Volts
Amps 6.1 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 10 ft
Refrigeration Type Self-Contained, Side Mounted
Refrigerant Type R-290
BTU 2,600 BTU
Controls Electronic
Defrost Type Off-Cycle
Compressor Style Front Breathing
Condensate Evaporation Hot Gas

Description

The Continental Refrigerator RA93SN8 is a shallow-depth refrigerated sandwich prep unit with a 93-inch refrigerated base, an 8-pan top, and four doors.

  • Includes eight recessed 1/6-size pans that are 4 inches deep.
  • Features three full-height doors and one half-height door.
  • Uses self-contained, side-mounted refrigeration with R-290 refrigerant.
  • Includes electronic control, off-cycle defrost, and a hot gas condensate evaporator.
  • Constructed with a 300 series stainless steel top, stainless steel front and sides, a galvanized steel case back, and an aluminum interior.

Overall Dimensions:

93.0"W x 30.0"D x 42.0"H

Product Weight:

480.0 lb

Shallow-Depth Design

Designed as a shallow-depth refrigerated base sandwich unit.

Eight-Pan Top

Includes eight recessed 1/6-size pans that are 4 inches deep.

Four-Door Configuration

Includes three full-height doors and one half-height door.

R-290 Refrigeration

Uses a self-contained, side-mounted refrigeration system with R-290 refrigerant.

Electronic Control

Provides electronic control with off-cycle defrost.

Hot Gas Condensate Evaporator

Uses a hot gas condensate evaporator.

Field-Rehingeable Doors

The doors can be field rehinged.

Front-Breathing Compressor

The refrigeration system uses a front-breathing compressor arrangement.

Frequently Asked Questions

The top holds eight recessed 1/6-size pans that are 4 inches deep.
The unit has three full-height doors and one half-height door.
It uses R-290 refrigerant.
The specification lists 115 Volts, 6.1 Amps, 60 Hz, single phase, with an attached NEMA 5-15P plug.
The unit includes six shelves.
The warranty provides six years of parts and labor coverage, plus an additional one-year parts-only warranty for the hermetically sealed R-290 compressor.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030