Key specifications
- Amps
- 3 Amps
- Phase
- 1-Phase
- Dimensions
- 48.25"W × 38.38"D × 44.38"H
- Type
- Prep Table
- Style
- Mega Top
- Installation Type
- Floor Model
Spec sheet
Refrigeration X XST-48-18-N Sandwich/Salad Prep Table, 2 Solid Doors, 18-Pan Capacity, 48-1/4"W
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The XST-48-18-N is a two-section sandwich and salad prep table with 18 1/6-size, 4-inch-deep pan capacity, a cold air compartment, and two solid doors.
It includes a 9-1/2-inch-deep cutting board with side rail, two adjustable PE-coated wire shelves, and one hood. The rear-mounted self-contained refrigeration system uses R-290 hydrocarbon refrigerant and operates at 115 volts.
- Refrigerated temperature range of 33°F to 39°F
- Stainless steel door exterior with aluminum sides and galvanized steel back and bottom
- Four-inch swivel casters with locks on the front set
Overall Dimensions:
48.25"W x 38.38"D x 44.38"HProduct Weight:
293.0 lbMega-Top Pan Section
Provides 18 1/6-size, 4-inch-deep pan capacity with a cold air compartment.
Solid-Door Storage
Includes two solid doors for the refrigerated cabinet section.
Cutting Board
Includes a 9-1/2-inch-deep, 1/2-inch-thick cutting board with side rail.
Adjustable Shelving
Includes two adjustable, heavy-duty PE-coated wire shelves.
Self-Contained Refrigeration
Uses a rear-mounted self-contained compressor and R-290 hydrocarbon refrigerant.
Temperature Range
Refrigerator holds 33°F to 39°F.
Cabinet Construction
Uses a stainless steel door exterior, aluminum exterior sides, galvanized steel back and bottom, and high-density polyurethane insulation.
Caster Base
Includes 4-inch swivel casters with locks on the front set.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.