Key specifications
- Amps
- 4.1 Amps
- Phase
- 1-Phase
- Dimensions
- 60.25"W × 31.25"D × 42.25"H
- Type
- Prep Table
- Style
- Sandwich/Salad
- Installation Type
- Floor Model
Spec sheet
Refrigeration X XST-60-N Sandwich/Salad Prep Table, 2 Solid Doors, 16-Pan Capacity, 60-1/4"W, Rear-Mounted Self-Contained Refrigeration
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Refrigeration X XST-60-N is a sandwich/salad prep table with two solid doors, 20.73 cubic feet of capacity, and rear-mounted self-contained refrigeration.
- Provides capacity for 16 1/6-size, 4-inch-deep pans in a cold air compartment.
- Includes a 9-1/2-inch-deep, 1/2-inch-thick cutting board with side rail.
- Includes two adjustable polyethylene-coated wire shelves.
- Uses R-290 hydrocarbon refrigerant and a 2/5 HP compressor.
- Features a stainless steel door, aluminum exterior sides, and galvanized steel back and bottom.
- Requires 115 volts, 60 Hz, single-phase power and a NEMA 5-15P plug.
Overall Dimensions:
60.25"W x 31.25"D x 42.25"HProduct Weight:
353.0 lbPan Capacity
Provides capacity for 16 1/6-size, 4-inch-deep pans; the cutsheet lists the condiment pans as included.
Cold Air Compartment
Separates the pan area from the reach-in section and provides cold air circulation for the pans.
Cutting Board
Includes a 9-1/2-inch-deep, 1/2-inch-thick cutting board with side rail.
Adjustable Shelves
Includes two adjustable, heavy-duty polyethylene-coated wire shelves.
Self-Contained Refrigeration
Uses a rear-mounted self-contained system with R-290 hydrocarbon refrigerant.
Temperature Range
Specified to hold 33°F to 39°F.
Cabinet Construction
Uses a stainless steel exterior door, aluminum exterior sides, galvanized steel back and bottom, and stainless steel interior floor and back with aluminum sides.
Casters
Includes 4-inch swivel casters with locks on the front set.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.