Key specifications
- Amps
- 6.1 Amps
- Phase
- 1-Phase
- Dimensions
- 93.0"W × 30.0"D × 42.0"H
- Type
- Sandwich Prep Table
- Style
- Shallow Depth
- Installation Type
- Floor Model
Continental Refrigerator RA93SN12 12-Pan Prep Table
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Continental Refrigerator RA93SN12 is a 93-inch shallow-depth refrigerated sandwich prep table with a 12-pan top and four-door base.
- Pan setup: Twelve 1/6-size, 4-inch-deep recessed pans.
- Construction: Stainless steel top, front, and sides with a galvanized steel case back and aluminum interior.
- Storage: Three full-height and one half-height field-rehingeable doors, plus six shelves.
- Refrigeration: Self-contained, side-mounted refrigeration with R-290 refrigerant, electronic control, off-cycle defrost, and hot gas condensate evaporation.
Overall Dimensions:
93.0"W x 30.0"D x 42.0"HProduct Weight:
480.0 lbPan Top
Includes twelve recessed 1/6-size pans that are 4 inches deep.
Door Configuration
Provides three full-height doors and one half-height door; the doors are field rehingeable.
Cabinet Construction
Uses stainless steel for the top, front, and sides, with a galvanized steel case back and aluminum interior.
Refrigeration System
Features self-contained, side-mounted refrigeration with R-290 refrigerant and a hot gas condensate evaporator.
Controls and Defrost
Uses electronic controls and off-cycle defrost.
Shelf Storage
Includes six shelves.
Electrical Connection
Uses 115 volts, 6.1 amps, 60 Hz, single-phase power with a NEMA 5-15P plug and attached 10-foot cord.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.