Key specifications

BTU
2,600 BTU
Amps
5.8 Amps
Phase
1-Phase
Dimensions
68.0"W × 30.0"D × 42.0"H
Type
Sandwich Prep Table
Style
Shallow Depth
Spec sheet

Continental Refrigerator RA68SN10 68-Inch 10-Pan Prep Table

$7,014.42
/each
Estimated to ship in 4–7 business days Free Shipping
ElectricalRequired
Door and drawer configuration
Section above condensing unit
Lid
Interior

Need something else? Contact us.

Included: Continental Refrigerator warranty Six-year parts and labor warranty with an additional one-year R-290 compressor-part warranty

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $649/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Sandwich Prep Table
Style Shallow Depth
Installation Type Floor Model
Material Stainless Steel
Finish Stainless Steel
Capacity 17.6 Cubic Feet
Door Count 3 Doors
Door Configuration 2 Full-Height, 1 Half-Height
Sections 3 Sections
Pan Size 1/6 Size
Pan Capacity 10 Pans
Pan Depth 4 Inches
Shelf Count 4
Shelf Material Epoxy-Coated Steel
Voltage 115 Volts
Amps 5.8 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 10 Feet
BTU 2,600 BTU
Compressor Style Front Breathing
Refrigeration Type Self-Contained, Side-Mounted
Refrigerant Type R-290
Controls Electronic
Defrost Type Off-Cycle
Condensate Evaporation Hot Gas
Insulation 2 Inches Polyurethane
Cutting Board Material Nylon
Case Back Material Galvanized Steel

Description

The RA68SN10 is a 68-inch shallow-depth refrigerated sandwich prep table with a refrigerated base, three doors, and a 10-pan top.

  • 300 series stainless steel top with stainless steel front and end panels
  • Ten recessed 1/6-size pans, each 4 inches deep
  • Two full-height doors and one half-height field-rehingeable door
  • Side-mounted, self-contained refrigeration with R-290 hydrocarbon refrigerant
  • Electronic control with off-cycle defrost
  • Automatic hot gas condensate evaporator
  • Four epoxy-coated steel shelves

Overall Dimensions:

68.0"W x 30.0"D x 42.0"H

Product Weight:

390.0 lb

Pan Configuration

Ten recessed 1/6-size pans, each 4 inches deep.

Door Configuration

Two full-height doors and one half-height field-rehingeable door.

Refrigeration

Side-mounted, self-contained refrigeration using R-290 hydrocarbon refrigerant.

Control and Defrost

Electronic control with off-cycle defrost.

Construction

300 series stainless steel top with stainless steel front and end panels.

Shelving

Four epoxy-coated steel shelves.

Condensate Management

Automatic hot gas condensate evaporator.

Frequently Asked Questions

It has ten 1/6-size, 4-inch-deep pans.
The unit has two full-height doors and one half-height field-rehingeable door.
It uses R-290 hydrocarbon refrigerant.
The specified connection is 115 volts, 60 Hz, single-phase with a NEMA 5-15P plug and 10-foot cord.
Yes. It has a nylon cutting board.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030