Key specifications

Amps
5.8 Amps
Phase
1-Phase
Dimensions
68.0"W × 37.0"D × 42.0"H
Type
Sandwich Prep Table
Style
Refrigerated Base
Installation Type
Floor Model
Spec sheet

Continental Refrigerator RA68N8 8-Pan 3-Door Prep Table

$6,847.27
/each
Estimated to ship in 4–7 business days Free Shipping
Type
ElectricalRequired
Main storage sections
Section above condensing unit
Pan configuration
Lid

Need something else? Contact us.

Included: Continental Refrigerator warranty Seven-year parts, labor, and compressor warranty

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $633/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Sandwich Prep Table
Style Refrigerated Base
Installation Type Floor Model
Material Stainless Steel
Finish Stainless Steel
Interior Material Aluminum
Back Material Galvanized Steel
Capacity 22 Cubic Feet
Pan Size 1/6 Size
Pan Capacity 8 Pans
Pan Depth 4 in
Shelf Count 4 Shelves
Sections 3 Sections
Door Count 3 Doors
Full Door Count 2 Doors
Half Door Count 1 Door
Door Type Solid
Door Operation Self-Closing
Door Hinge Field Rehingeable
Cutting Board Depth 12 in
Caster Size 5 in
Voltage 115 Volts
Amps 5.8 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 10 ft
Refrigerant Type R-290
Refrigeration Type Self-Contained
Refrigeration Location Side Mounted
Compressor Style Front Breathing
Refrigeration Capacity 2,600 BTU per Hour
Controls Electronic Controller With Digital Display
Defrost Off-Cycle
Insulation 2 in Polyurethane Foam

Description

The Continental Refrigerator RA68N8 is a 68-inch sandwich prep table with a refrigerated base, three solid doors, and an eight-pan top.

The #300 series stainless steel top is specified for eight 1/6-size, 4-inch-deep pans and includes a 12-inch-deep, full-length nylon cutting board. The cabinet has stainless steel front and sides, a galvanized steel case back, and an aluminum interior.

Self-contained, side-mounted refrigeration uses R-290 refrigerant, an electronic controller with digital display, and off-cycle defrost.

  • Overall dimensions: 68 inches wide, 37 inches deep, and 42 inches high including 5-inch casters
  • 22 cubic feet of net capacity
  • Two full-height and one half-height field-rehingeable doors
  • 115-volt, 60 Hz, single-phase electrical service with 5.8 amps and a NEMA 5-15P plug

Overall Dimensions:

68.0"W x 37.0"D x 42.0"H

Product Weight:

490.0 lb

Eight-Pan Prep Top

The stainless steel top is specified for eight 1/6-size, 4-inch-deep pans.

Refrigerated Base

Self-contained, side-mounted refrigeration uses R-290 refrigerant.

Door Configuration

The unit has two full-height and one half-height solid doors that are spring-loaded, self-closing, and field rehingeable.

Nylon Cutting Board

A 12-inch-deep, full-length nylon cutting board is specified.

Cabinet Construction

Construction includes a stainless steel top, front, and sides, a galvanized steel case back, and an aluminum interior.

Electronic Control

An electronic controller with digital display and off-cycle defrost manages the refrigeration system.

Caster Mobility

The unit is equipped with 5-inch casters.

Electrical Service

The specified electrical service is 115 volts, 60 Hz, single phase, and 5.8 amps with a NEMA 5-15P plug.

Frequently Asked Questions

The top is specified for eight 1/6-size, 4-inch-deep pans.
It has two full-height and one half-height solid door, for a total of three doors.
The unit uses natural R-290 refrigerant.
The specified service is 115 volts, 60 Hz, single phase, and 5.8 amps with a NEMA 5-15P plug and a 10-foot cord.
The unit is 68 inches wide, 37 inches deep, and 42 inches high including the 5-inch casters.
Yes. It is specified with a 12-inch-deep, full-length nylon cutting board.
The model specifications list four shelves.
The R-290 model warranty specifies seven years for parts, labor, and the compressor, subject to the stated terms and exclusions.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030