Key specifications
- BTU
- 2,600 BTU/hr
- Amps
- 5.8 Amps
- Phase
- 1-Phase
- Dimensions
- 60.0"W × 37.0"D × 42.0"H
- Type
- Sandwich Prep Table
- Style
- Standard Top
Continental Refrigerator RA60N8 60-Inch 8-Pan Prep Table
- 1 Full Door and 1 Half Door
- 2 Full Doors and 1 Half Door
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Continental Refrigerator RA60N8 is a 60-inch refrigerated sandwich prep table with a stainless steel top, front, and sides. The refrigerated base has two full-height and one half-height solid doors, a 12-inch-deep nylon cutting board, and four epoxy-coated steel shelves.
Its self-contained, side-mounted refrigeration system uses R-290 refrigerant and includes an electronic controller with digital display. The unit has an aluminum interior, galvanized steel case back, front-breathing design, and 5-inch casters.
- Top: Eight 1/6-size, 4-inch-deep pans
- Dimensions: 60 inches wide, 37 inches deep, and 42 inches high including casters
- Electrical: 115 volts, 60 Hz, single phase, with a NEMA 5-15P plug
Overall Dimensions:
60.0"W x 37.0"D x 42.0"HProduct Weight:
420.0 lbEight-Pan Top
Configured for eight 1/6-size, 4-inch-deep top pans.
Three-Door Configuration
Includes two full-height and one half-height solid doors.
Stainless Steel Exterior
The top, front, and sides are stainless steel.
Nylon Cutting Board
Includes a 12-inch-deep, full-length nylon cutting board.
R-290 Refrigeration
Uses self-contained, side-mounted refrigeration with R-290 refrigerant.
Electronic Controller
Electronic controller with digital display and off-cycle defrost.
Aluminum Interior
The cabinet interior is aluminum and includes four epoxy-coated steel shelves.
Caster Mobility
Equipped with 5-inch casters.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.