Key specifications
- BTU
- 240,000 BTU/hr (Natural Gas); 220,000 BTU/hr (Propane)
- Gas Type
- Natural Gas / Propane
- Dimensions
- 48.0"W × 31.38"D × 16.63"H
- Type
- Hotplate
- Installation Type
- Countertop
- Material
- Stainless Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Wolf Achiever AHP848 is a 48-inch countertop gas hotplate with eight open burners and a total output of 240,000 BTU/hr for natural gas or 220,000 BTU/hr for propane.
- Eight 30,000 BTU/hr open burners with lift-off burner heads
- Cast iron top grates and standing pilot ignition
- Manual gas valve controls with one infinite heat control valve per burner
- Stainless steel sides, control panel, top trim, and backsplash
- Full-width pull-out crumb tray and 4-inch adjustable legs
The appliance includes a 3/4-inch NPT rear gas connection and supplied gas pressure regulator. It is intended for commercial installation and not home use.
Overall Dimensions:
48.0"W x 31.38"D x 16.63"HProduct Weight:
310.0 lbEight Open Burners
Includes eight 30,000 BTU/hr open burners for natural gas; each is rated 27,500 BTU/hr for propane and has a lift-off burner head.
Cast Iron Grates
The top grates are made of cast iron.
Standing Pilot Ignition
Uses a standing pilot ignition system.
Manual Gas Valve Controls
One infinite heat control valve is provided for each burner.
Stainless Steel Exterior Components
Stainless steel sides, control panel, top trim, and backsplash.
Pull-Out Crumb Tray
Features a full-width pull-out crumb tray.
Adjustable Legs
Includes 4-inch adjustable legs.
Gas Connection and Regulator
Includes a 3/4-inch NPT rear gas connection and supplied gas pressure regulator.
Commercial Installation
Intended for commercial installation and not home use.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.