Key specifications
- Amps
- 10.0-8.4 Amps
- Phase
- 1-Phase
- Dimensions
- 22.0"W × 35.0"D × 21.0"H
- Type
- Meat Grinder
- Style
- Bench Style
- Installation Type
- Countertop
Univex MG22 Bench Meat Grinder with #22 Hub
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Univex MG22 is a bench-style, gear-driven meat grinder with a #22 attachment hub and 1 HP motor.
- Grinds approximately 25 lb per minute on the first grind with the supplied 3/16-inch plate.
- Features an aluminum feed pan and housing with a 23.5-quart feed pan capacity.
- Includes a #22 knife, plastic meat container, feed stomper, and cleaning brush.
- Standard electrical specification is 115 V, 1 phase, 60 Hz, with a NEMA 5-15P plug.
Overall Dimensions:
22.0"W x 35.0"D x 21.0"HProduct Weight:
158.0 lbGear-Driven Transmission
The grinding worm is directly coupled to the gear motor output shaft.
Bench-Style Design
The MG22 is identified as a bench-style meat grinder.
#22 Grinding System
Accepts industry-standard #22 plates and knives.
Grinding Rate
Grinds approximately 25 lb per minute on the first grind with a 3/16-inch plate.
Feed Pan
The aluminum feed pan has a 23.5-quart capacity and measures 17 x 25 inches.
Included Items
Includes a 3/16-inch grinding plate, #22 knife, plastic meat container, feed stomper, and cleaning brush.
Start/Stop Controls
Uses a momentary-contact start/stop push button; a microswitch interlock prevents operation when the chopper is not properly mounted.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.