Refrigeration X XBD-4SB-N Commercial Beer Dispenser, 90-3/8"W, 36.47 cu. ft., 3 Swing Doors, 2 Double-Faucet Towers

SKU: XBD-4SB-N
$2,571.60
/each
Enter ZIP for a shipping estimate

Want to speak to an expert?

XBD-4SB-N is a commercial beer dispenser with 36.47 cu. ft. of capacity, four half-barrel capacity, and three swing doors.

The unit has a black vinyl exterior, stainless steel countertop, stainless steel interior with a galvanized steel top, and two 3-inch stainless steel insulated beer towers with double faucets. Air-cooled refrigeration uses a side-mounted 1/3 HP compressor and R-290 hydrocarbon refrigerant.

  • Overall dimensions: 90-3/8 inches wide by 27-1/4 inches deep by 37-1/8 inches high
  • 115V electrical service with 3.2 amp draw and NEMA 5-15P plug
  • Does not include keg couplers

Overall Dimensions:

90.37"W x 27.25"D x 37.12"H

Four half-barrel capacity

The dispenser is specified for four half barrels.

Double-faucet beer towers

Two 3-inch stainless steel insulated beer towers are specified with double faucets.

Stainless steel cabinet surfaces

The unit has a stainless steel countertop and stainless steel interior with a galvanized steel top, plus a black vinyl exterior.

Air-cooled refrigeration

The forced-air cooling system is specified for a 33°F to 38°F temperature range.

Side-mounted compressor

The 1/3 HP compressor is mounted on the side of the unit.

R-290 refrigerant

The refrigeration system uses R-290 hydrocarbon refrigerant.

High-density polyurethane insulation

The cabinet uses foamed-in-place, high-density, HCFC-free polyurethane insulation.

Self-contained system

The cutsheet identifies the unit as a self-contained system.

Swivel casters

The unit has six 2.5-inch swivel casters, with locks on the front set.

Countertop mounting

The product is specified for countertop mounting.

Product type Beer dispenser
Capacity 36.47 cu. ft.
Keg capacity 4 half barrels
Door count 3
Door type Swing
Exterior finish Black vinyl
Countertop material Stainless steel
Interior material Stainless steel
Interior top material Galvanized steel
Beer tower quantity 2
Beer tower diameter 3 in.
Beer tower material Stainless steel
Faucet configuration Double faucet
Cooling type Air cooled; forced air
Temperature range 33°F to 38°F
Compressor location Side mount
Compressor power 1/3 HP
Refrigerant R-290 hydrocarbon
Voltage 115 V
Frequency 60 Hz
Phase 1 phase
Amperage 3.2 A
Plug type NEMA 5-15P
Cord length 8.5 ft.
Mounting Countertop
Column finish Chrome
Caster quantity 6
Caster diameter 2.5 in.
Caster type Swivel; front set with locks
Insulation High-density, HCFC-free polyurethane
System type Self-contained
Net weight 420 lb.
Crated weight 443 lb.
Dimension notes Depth excludes 3/8 in. for door handles and 1-1/4 in. for rear spacers; height excludes 3-1/8 in. for caster height and 16 in. for draft arm

Certifications & Compliance

Certified badge of ETL Listed
ETL Listed

Warranty & Protection

2-year parts and labor warranty plus 5-year compressor warranty.

Frequently Asked Questions

The dispenser is specified for four half barrels and has 36.47 cu. ft. of capacity.
The unit has two 3-inch stainless steel insulated beer towers with double faucets.
The XBD-4SB-N has three swing doors.
The listed dimensions are 90-3/8 inches wide by 27-1/4 inches deep by 37-1/8 inches high. The cutsheet notes that depth excludes door handles and rear spacers, while height excludes caster height and the draft arm.
It requires 115V, 60 Hz, single-phase power, draws 3.2 amps, and uses a NEMA 5-15P plug.
No. The cutsheet states that keg couplers are not included.
The product has a two-year parts and labor warranty and a five-year compressor warranty, listed for the U.S.A. only.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.