Perlick Corporation FR60RT-3 Underbar Glass Froster, 60"W, Self-Contained, 2 Stainless Steel Top Sliding Doors, -10°F to 10°F

SKU: FR60RT-3
$5,334.45
/each
Enter ZIP for a shipping estimate

Want to speak to an expert?

Perlick FR60RT-3 is a 60-inch underbar glass froster with self-contained refrigeration, a 16.3 cu. ft. interior, and an adjustable temperature range of -10°F to 10°F.

  • Includes two dent-resistant stainless steel top sliding doors with die-cast handles.
  • Stainless steel top and interior with included floor racks.
  • Uses R290 refrigerant and a 1/4 HP condensing unit.
  • No drain is required because condensate evaporates automatically.

The unit is evaluated for chilling glassware and plates and is not intended for food storage.

Overall Dimensions:

60.0"W x 24.0"D x 34.13"H

Product Weight:

353.0 lb

Self-contained refrigeration

The froster uses a self-contained refrigeration system with no drain required; condensate evaporates automatically.

Adjustable temperature control

The controller is adjustable from -10°F to 10°F and is factory set at approximately 0°F.

Top sliding doors

Two dent-resistant stainless steel sliding doors are mounted on top and use die-cast handles.

Stainless steel construction

The unit has a stainless steel top and stainless steel interior walls and floor.

Glass and plate storage

The FR60RT-3 is rated for 286 glasses or 400 plates under the stated capacity conditions.

Included floor racks

Floor racks are included with the unit.

Defrost system

The froster has an automatic electric defrost cycle and a manually initiated six-hour defrost system.

R290 refrigeration

The refrigeration system uses R290 refrigerant and a 1/4 HP hermetic condensing unit.

Product Type Underbar glass froster
Refrigeration Type Self-contained
Temperature Range -10°F to 10°F
Interior Volume 16.3 cu. ft. (462 L)
Door Count 2
Door Type Top sliding doors
Door Material Dent-resistant stainless steel
Handle Material Die-cast
Top and Interior Material Stainless steel
Glass Capacity 286 glasses, based on 3-inch diameter glass
Plate Capacity 400 plates
Included Storage Floor racks
Insulation 2-inch foamed-in-place Ecomate polyurethane
Defrost Automatic electric defrost every 4 hours; manually initiated six-hour defrost system
Condensate Management Self-evaporating condensing pan; no drain required
Refrigerant R290
Refrigerant Charge 115 g
Compressor 1/4 HP
Voltage 120 VAC
Frequency 60 Hz
Phase 1 phase
Running Load 3.8 A
Power Cord 6 ft with NEMA 5-15P plug
Installation Clearance At least 2 in from the wall at the back or left end
Certification NSF, cULus

Frequently Asked Questions

The adjustable temperature range is -10°F to 10°F, with a factory setting of approximately 0°F.
The interior net volume is 16.3 cu. ft. (462 L).
The listed capacity is 286 glasses or 400 plates. Glass capacity is based on 3-inch diameter glassware.
No. No plumbing connections are required, and condensate evaporates automatically through the condensing pan.
It requires 120 VAC, 60 Hz, single-phase power, draws 3.8 amps, and includes a 6-foot cord with a NEMA 5-15P plug.
At least 2 inches of clearance from the wall is required at either the left end or the back of the cabinet.
No. It is evaluated for chilling glassware and plates and is not intended for the storage of food products.
The product specification sheet lists a 1-year parts and labor warranty and a 5-year compressor warranty.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.