Perlick Corporation Quick Ship FR48RT-SS-STK 48" Underbar Glass Froster, Stainless Steel, Top Sliding Doors, -10°F to 10°F

SKU: FR48RT-SS-STK
$5,265.15
/each
Enter ZIP for a shipping estimate

Want to speak to an expert?

The Perlick Quick Ship FR48RT-SS-STK is a 48-inch underbar glass froster with self-contained R290 refrigeration, a 12.5 cu. ft. stainless steel interior, and two top sliding doors.

  • Temperature control: Adjustable from -10°F to 10°F and factory set at 0°F.
  • Construction: Stainless steel interior, front, top, doors, and sides.
  • Convenience: Includes floor racks, a door frame heater, and a self-evaporating condensing pan.
  • Installation: Plug-in design with no drain required.

This unit is evaluated for chilling glassware and plates and is not intended for food storage.

Overall Dimensions:

48.0"W x 24.0"D x 34.13"H

Product Weight:

300.0 lb

Adjustable temperature control

The digital control is factory set at approximately 0°F and adjusts from -10°F to 10°F.

Top sliding doors

Two dent-resistant stainless steel sliding doors use die-cast handles.

Stainless steel construction

The unit has stainless steel interior walls and floor, plus a stainless steel front, top, doors, and sides.

Self-contained R290 refrigeration

The refrigeration system uses R290 refrigerant and a 1/4 HP compressor.

Defrost and condensate management

Automatic electric defrost operates every four hours, with a manually initiated six-hour defrost cycle; condensate evaporates automatically.

Included floor racks

Floor racks are included with the glass froster.

Glassware and plate capacity

The cabinet is rated for 214 glasses or 300 plates under the specified glass and plate sizing conditions.

Plug-in installation

The unit uses a 6-foot power cord with a NEMA 5-15P plug and requires no drain connection.

Product type Underbar glass froster
Refrigeration type Self-contained
Temperature range -10°F to 10°F
Factory temperature setpoint 0°F
Interior volume 12.5 cu. ft. (353 L)
Glass capacity 214 glasses, based on 3 in. diameter glasses
Plate capacity 300 plates, based on 9.5 in. diameter × 0.5 in. thick plates
Door configuration 2 top sliding doors
Door construction Dent-resistant stainless steel with die-cast handles
Door frame heater Included
Defrost Automatic electric defrost every 4 hours; manual six-hour defrost cycle
Condensate management Self-evaporating condensing pan; no drain required
Refrigerant R290
Refrigerant charge 100 g
Compressor 1/4 HP
Insulation 2 in. foamed-in-place insulation
Interior construction Stainless steel walls and floor
Exterior construction Stainless steel front, top, doors, and sides
Included equipment Floor racks
Electrical supply 120 VAC, 60 Hz, 1 phase
Running load 3.8 A
Power cord 6 ft. cord with NEMA 5-15P plug
Required clearance 2 in. from the wall at either the left end or back for proper airflow

Frequently Asked Questions

The temperature control adjusts from -10°F to 10°F, with a factory setpoint of 0°F.
No. Condensate evaporates automatically through the condensing pan.
The unit requires 120 VAC, 60 Hz, single-phase power, draws 3.8 amps, and includes a 6-foot cord with a NEMA 5-15P plug.
Yes. Floor racks are included.
The FR48 model requires 2 inches of clearance from the wall on either the left end or the back of the cabinet.
No. The product is evaluated by NSF for chilling glassware and plates and is not intended for food storage.
The product specification sheet lists a 1-year parts and labor warranty and a 5-year compressor warranty.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.