Key specifications
- Amps
- 16.7 Amps
- Phase
- 1-Phase
- Dimensions
- 30.0"W × 36.38"D × 74.75"H
- Type
- Holding Cabinet
- Style
- Pass-Thru
- Installation Type
- Floor Model
Metro C5 C599-SDC-LPDC 17-Pan Pass-Thru Holding Cabinet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Metro C5 C599-SDC-LPDC is a full-height mobile pass-thru cabinet for controlled-humidity heated holding and proofing.
It features two glass Dutch doors, lip-load slides for 17 18 x 26-inch pans at 3-inch centers, and 6.8-inch touch-screen controls for cabinet temperature and relative humidity.
- Construction: Type 304 stainless steel cabinet with a polished exterior and stainless steel interior.
- Electrical: 120 Volts, 60 Hz, 1-Phase, 2,000 Watts, 16.7 Amps, and NEMA 5-20P plug.
- Mobility: 5-inch casters with a polymer bumper and drip trough combination.
- Temperature range: 90°F to 200°F.
Overall Dimensions:
30.0"W x 36.38"D x 74.75"HProduct Weight:
400.0 lbControlled Humidity
The 6.8-inch touch screen displays cabinet temperature and relative humidity, with individual control for each.
Pass-Thru Configuration
The full-height cabinet has two glass Dutch doors in a pass-thru configuration.
Lip-Load Slides
The cabinet is specified for 17 18 x 26-inch pans with fixed 3-inch-on-center slide spacing.
Stainless Steel Construction
The cabinet uses Type 304 stainless steel with a polished exterior and stainless steel interior.
Mobile Base
Five-inch casters and a polymer bumper and drip trough combination support mobile use.
Insulation and Heating
The cabinet has 2.5-inch fiberglass insulation and a top-mounted heater.
Temperature Range
The specified operating temperature range is 90°F to 200°F.
Electrical Configuration
The cabinet is specified at 120 Volts, 60 Hz, 1-Phase, 2,000 Watts, and 16.7 Amps with a NEMA 5-20P plug.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.