Key specifications
- Amps
- 15 Amps
- Phase
- 1-Phase
- Dimensions
- 25.0"W × 26.25"D × 39.0"H
- Type
- Glass Washer
- Style
- Rotary
- Installation Type
- Floor Model
Krowne GWR-24 Rotary Glass Washer, 1,200 Glasses per Hour
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Krowne GWR-24 is a rotary underbar glass washer with low-temperature chemical sanitizing, clockwise conveyor movement, and a capacity of 1,200 2-1/2-inch glasses per hour.
- Glass clearance: Accepts glasses up to 12 inches high.
- Chemical dispensing: Built-in three-pump injection system and internal chemical storage support chemical washing.
- Conveyor: Polypropylene construction helps protect fine stemware from chipping.
- Rinse: Cool final rinse provides a cool glass ready for immediate use.
- Construction: Double-walled 304 stainless steel construction with 5-1/2-inch legs.
- Electrical: 3.0 kW tank heater, 208-230 volts, 60 Hz, 1-phase, 15 amps, and NEMA 6-15P plug.
Overall Dimensions:
25.0"W x 26.25"D x 39.0"HProduct Weight:
200.0 lbRotary Washing
Conveyor movement is clockwise.
Low-Temperature Chemical Sanitizing
Uses built-in chemical pumps for chemical sanitizing.
Three-Pump Injection System
Provides chemical dispensing for the wash cycle.
Glass Clearance
Accepts glasses up to 12 inches high.
Polypropylene Conveyor
Uses a polypropylene conveyor for fine stemware handling.
Cool Final Rinse
Provides a cool final rinse.
Internal Chemical Storage
Internal storage holds the required washing chemicals.
Double-Walled Construction
Constructed from double-walled 304 stainless steel.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.