Glastender GT-18+2 Side-to-Side Pass-Thru Glasswasher Station, 24-Inch Washer, Dual 18-Inch Drain Tables, Low-Temperature Sanitizing
- Configuration
- Side-to-side pass-thru glasswasher station
- Glasswasher width
- 24 in
- Drain table width
- 18 in each
- Sanitizing method
- Low-temperature chemical sanitizing
- Glasswashing capacity
- 720 2-1/2-in diameter glasses/hour or 600 2-3/4-in diameter glasses/hour
- Maximum glass height
- 10 in
Specifications
Description
The Glastender GT-18+2 is a side-to-side pass-thru glasswasher station with a 24-inch glasswasher and 18-inch drain tables on the left and right. It uses low-temperature chemical sanitizing with automatic chemical pumps and intelligent microprocessor control.
The unit washes up to 720 2-1/2-inch diameter glasses per hour, accommodates glassware up to 10 inches high, and includes two 16-inch diameter polypropylene racks and two curtains.
- Stainless steel construction with stainless steel legs and adjustable feet
- Digital temperature gauge and prime switch
- Removable top and side panels for cleaning and service access
- External chemical storage
Overall Dimensions:
60.0"W x 24.0"D x 38.5"HProduct Weight:
195.0 lbSide-to-side pass-thru layout
The 60-inch station places the 24-inch glasswasher between an 18-inch drain table on each side.
Low-temperature chemical sanitizing
Uses chemical sanitizing with automatic metering pumps for detergent, sanitizer, and rinse aid.
Intelligent microprocessor control
Delays cycle start for up to two minutes when incoming water is below 120°F.
Two-minute wash cycle
Provides 70 seconds of wash exposure and 22 seconds of rinse exposure.
Cleaning and service access
The top and side panels are removable, and the drive wheel and glass rack lift out for cleaning.
Included glass racks and curtains
Includes two 16-inch diameter polypropylene racks and a set of two end curtains.
Digital temperature monitoring
A digital temperature gauge is built into the switch panel.
Stainless steel construction
The station has stainless steel construction, stainless steel legs, and adjustable feet.
Documentation
Certifications & Compliance
Frequently Asked Questions
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.