Key specifications
- Amps
- 11.5/13.3 Amps
- Phase
- 1-Phase
- Dimensions
- 36.0"W × 30.0"D × 34.0"H
- Type
- Hot Food Table
- Style
- Mobile
- Installation Type
- Floor Model
Spec sheet
Eagle Group Director's Choice DCS2-HFU-C 2-Pan Hot Food Table
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Eagle Group Director's Choice DCS2-HFU-C is a mobile electric hot food table measuring 36 inches wide by 30 inches deep by 34 inches high.
- Two insulated 12 x 20-inch hot food wells support wet or dry operation.
- Each well has an individual thermostatic control.
- The 16-gauge type 304 stainless steel top, open-base frame, and operator-side apron provide the specified stainless steel construction.
- The unit has a holly berry red Wilsonart D307-60 laminate front panel.
- Five-inch poly tread casters provide mobility, with two casters equipped with brakes.
- The 208/240-volt single-phase unit is furnished with a NEMA 6-15 plug.
The table is wired to a cord and includes a quick-release spring-loaded docking device for joining adjoining units without tools.
Overall Dimensions:
36.0"W x 30.0"D x 34.0"HProduct Weight:
215.0 lbInsulated Wells
Two insulated 12 x 20-inch hot food wells.
Wet/Dry Operation
Specified for wet or dry operation.
Individual Thermostatic Controls
Each well has an individual thermostatic control.
Stainless Steel Top and Frame
The top, open-base frame, and operator-side apron are specified as type 304 stainless steel; the top is 16 gauge.
Mobile Casters
Five-inch poly tread casters provide mobility, and two have brakes.
Laminate Front Panel
The front panel is holly berry red Wilsonart D307-60 laminate.
Cord and Plug
The unit is wired to a cord and furnished with a NEMA 6-15 plug.
Docking Device
A quick-release spring-loaded docking device joins adjoining units without tools.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.