Key specifications
- Amps
- 16.7 Amps Hot; 2.4 Amps Cold
- Phase
- 1-Phase
- Dimensions
- 36.0"W × 30.0"D × 34.0"H
- Type
- Food Table
- Style
- Open Base
- Installation Type
- Floor Model
Spec sheet
Eagle Group Director's Choice DCS2-HCFU-A 36-Inch Hot/Cold Food Table
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Director's Choice DCS2-HCFU-A is a mobile food table designed for dual-temperature hot or cold operation. It has two top openings, a 16-gauge 304 stainless steel top, self-contained refrigeration, and a welded stainless steel open base.
- Hot mode: Immersion-type heating element with water required.
- Cold mode: Self-contained condensing unit with a sealed compressor and CFC-free refrigerant.
- Controls: Pre-wired hot/cold selector switch, thermostatic controls, and pilot light.
- Mobility: 5-inch poly tread swivel casters, including two with brakes.
- Finish: Holly berry red laminate front panel on a galvanized subpanel.
Overall Dimensions:
36.0"W x 30.0"D x 34.0"HProduct Weight:
190.0 lbDual-Temperature Operation
The unit supports either hot or cold operation through a hot/cold selector switch.
Hot Mode
An immersion-type heating element provides hot operation and requires water.
Cold Mode
Self-contained refrigeration uses a sealed compressor and a 1/5 HP condensing unit.
Thermostatic Controls
Pre-wired thermostatic controls and a pilot light are included.
Stainless Steel Construction
The 16-gauge top and welded tubular base use 304 stainless steel.
Open Base
The base is open on three sides and has a stainless steel apron on the operator side.
Mobile Casters
Five-inch poly tread swivel casters provide mobility; two casters have brakes.
Front Panel
The front panel has a standard holly berry red laminate finish on a galvanized subpanel.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.