Key specifications
- Amps
- 16.7 Amps at 120 Volts; 9.6 Amps at 208 Volts; 8.3 Amps at 240 Volts
- Phase
- 1-Phase
- Dimensions
- 32.0"W × 28.0"D × 36.0"H
- Type
- Hot Food Counter
- Style
- Mobile
- Installation Type
- Floor Model
Dinex DineXpress DXP2HF 2-Well Mobile Hot Food Counter
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
DineXpress DXP2HF is a mobile electric hot food counter with two 6-1/2-inch-deep wells for food holding. Each well has a 1,000-watt tubular heating element with individual thermostatic control.
- 14-gauge stainless steel top, 20-gauge stainless steel front and end panels, and 18-gauge stainless steel bottom shelf.
- Wells can operate wet or dry.
- 5-inch swivel plate casters, including two with brakes, support mobile service.
- Manifold drains and an 8-foot electrical cord and plug are standard.
- An interlocking mechanism allows modular connection with other DineXpress units.
Overall Dimensions:
32.0"W x 28.0"D x 36.0"HProduct Weight:
285.0 lbTwo Hot Food Wells
The unit has two bottom-mounted wells, each 6-1/2 inches deep with coved corners.
Individual Thermostatic Controls
Each well has its own 1,000-watt tubular heating element with individual thermostatic control.
Wet or Dry Operation
The wells can be operated wet or dry.
Stainless Steel Construction
The top is 14-gauge stainless steel; the front and end panels are 20-gauge stainless steel; and the bottom shelf is 18-gauge stainless steel.
Mobile Casters
The counter has 5-inch swivel plate casters, with two casters equipped with brakes.
Modular Interlocking Design
An interlocking mechanism allows the unit to interlock with other DineXpress units.
Manifold Drains
Manifold drains are standard, with a 3/4-inch FPT drain valve.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.