Customize Continental Refrigerator Model no. SW72N12C-FB-D
Play manufacturer video for Continental Refrigerator SW72N12C-FB-D Three-Section Sandwich Prep Table, 6 Drawers, Front-Breathing, 72" Wide, 12-Pan TopContinental Refrigerator SW72N12C-FB-D Three-Section Sandwich Prep Table, 6 Drawers, Front-Breathing, 72" Wide, 12-Pan Top
The Continental Refrigerator SW72N12C-FB-D is a three-section sandwich prep refrigerator with six drawers, front-breathing refrigeration, and a 12-pan cutting top.
- Pan top: Accommodates twelve 1/6-size pans that are 4 inches deep and includes a 19-inch-deep cutting board.
- Drawer storage: Six stainless steel roll-out drawers accommodate the specified drawer pan configurations.
- Refrigeration: Self-contained, rear-mounted refrigeration uses natural R-290 refrigerant and is specified to maintain pan product at 33°F to 41°F.
- Construction: Stainless steel front, top, and end panels with an aluminum interior and 2-inch non-CFC polyurethane foam insulation.
- Controls: Electronic controller with digital display and off-cycle defrost.
- Mobility: Equipped with 3-3/4-inch casters.
The front-breathing ventilation system is designed to allow the cabinet to sit flush against a wall or be built into a counter. The area under and in front of the cabinet must remain unobstructed for proper operation.
Overall Dimensions:
72.0"W x 39.25"D x 41.0"HProduct Weight:
555.0 lbFront-breathing refrigeration
The front-breathing ventilation system is designed to allow flush-to-wall or built-in-counter installation; the area under and in front of the cabinet must remain unobstructed.
12-pan cutting top
The top accommodates twelve 1/6-size pans that are 4 inches deep and has a 19-inch-deep cutting board.
Six roll-out drawers
The unit has six stainless steel roll-out drawers with magnetic snap-in Santoprene drawer gaskets.
Drawer pan configurations
Each drawer accommodates one 12 x 18 x 6 pan or one 1/2-size 6-inch pan and one 1/3-size 6-inch pan; these drawer pans are supplied by others.
R-290 refrigeration
The self-contained refrigeration system uses natural R-290 refrigerant and is specified to maintain pan product at 33°F to 41°F.
Electronic control
Electronic control with digital display and off-cycle defrost.
Stainless steel and aluminum construction
Stainless steel front, top, and end panels with an aluminum back and interior.
Caster mobility
Equipped with 3-3/4-inch casters.
Certifications & Compliance
Warranty & Protection
Seven-year parts, labor, and compressor warranty for the original purchaser of the self-contained unit.
Frequently Asked Questions
Need Help Deciding?
Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.