Continental Refrigerator SW60N16C-FB-D 60-Inch Two-Section Refrigerated Sandwich Prep Table, 4 Drawers, 16-Pan Capacity, Front-Breathing

SKU: SW60N16C-FB-D
$9,152.78
Free Shipping

Want to speak to an expert?

The Continental Refrigerator SW60N16C-FB-D is a 60-inch, two-section sandwich unit refrigerator with four drawers, front-breathing ventilation, and rear-mounted self-contained refrigeration.

  • Top pan configuration: Specified for 16 1/6-size pans that are 4 inches deep, with a 19-inch cutting board.
  • Drawer storage: Each drawer accommodates one 12 x 20 x 6-inch pan; drawer pans are supplied by others.
  • Construction: Stainless steel top, front and end panels with an aluminum interior.
  • Controls: Electronic controller with digital display and off-cycle defrost.
  • Refrigerant: R-290 natural refrigerant.
  • Mobility: 3-3/4-inch casters.

The front-breathing design is intended for flush-to-wall or built-in-counter placement. The area under and in front of the cabinet must remain unobstructed for proper operation.

Overall Dimensions:

60.0"W x 39.25"D x 41.0"H

Product Weight:

465.0 lb

Front-breathing ventilation

The front-breathing system is designed for flush-to-wall or built-in-counter placement; the area under and in front of the cabinet must remain unobstructed.

Two-section configuration

The refrigerator has two sections and four drawers.

Top pan configuration

The unit is specified for 16 1/6-size pans that are 4 inches deep.

Drawer pan configuration

Each drawer accommodates one 12 x 20 x 6-inch pan; these drawer pans are supplied by others.

Self-contained refrigeration

The refrigeration system is self-contained and rear mounted.

R-290 refrigerant

The model uses natural R-290 refrigerant.

Stainless steel and aluminum construction

The top, front, and end panels are stainless steel, and the interior is aluminum.

Electronic control

An electronic controller with digital display provides control, with off-cycle defrost.

Cutting board

The unit has a 19-inch cutting board.

Casters

The unit has 3-3/4-inch casters.

Product type Sandwich unit refrigerator
Sections 2
Drawer count 4
Top pan capacity 16 x 1/6-size pans, 4 inches deep
Drawer pan configuration 1 x 12 x 20 x 6-inch pan per drawer; supplied by others
Cutting board depth 19 inches
Ventilation Front breathing
Refrigeration Self-contained, rear mounted
Refrigerant R-290
Temperature range 33-41°F
Net capacity 17.0 cu. ft.
Exterior construction Stainless steel top, front and end panels
Interior construction Aluminum
Insulation 2-inch non-CFC polyurethane foam
Controller Electronic control with digital display
Defrost Off-cycle
Casters 3-3/4 inches
Voltage 115/60/1; 220/50/1 international
Total amps 5.7; 3.6 international
Plug NEMA-5-15P with 10-foot attached cord
Compressor size 1/3+ HP
Refrigeration capacity 2560 BTU per hour

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified

Warranty & Protection

Seven-year parts, labor and compressor warranty.

Frequently Asked Questions

It is specified for 16 1/6-size pans that are 4 inches deep.
Each drawer accommodates one 12 x 20 x 6-inch pan. These drawer pans are supplied by others.
Yes. Its front-breathing design is intended for flush-to-wall or built-in-counter placement, but the area under and in front of the cabinet must remain unobstructed.
The unit uses natural R-290 refrigerant.
The product is 60.0 inches wide, 39.25 inches deep, and 41 inches high, with a listed weight of 465 pounds.
It uses a rear-mounted, self-contained refrigeration system.
The product has a seven-year parts, labor, and compressor warranty for the original purchaser in the United States and Canada, subject to the manufacturer's terms.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.