Key specifications

BTU
4,234 BTU/hr
Amps
7.8 Amps
Phase
1-Phase
Dimensions
119.0"W × 37.0"D × 53.13"H
Type
Pizza Prep Table
Installation Type
Floor Model
Spec sheet
Beverage Air SKU: DPD119HC-6

Beverage Air DPD119HC-6 119-Inch Pizza Prep Table, 6 Drawers

$14,449.73
/each
Estimated to ship in 36–39 business days Free Shipping
Configuration
Compressor locationRequired
Refrigeration system
Mounting
Back material
Interior material

Need something else? Contact us.

Included: Beverage Air warranty 7-year parts and labor warranty with a 7-year compressor parts warranty

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $1,337/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Pizza Prep Table
Installation Type Floor Model
Material Stainless Steel
Finish Stainless Steel
Interior Finish Aluminum
Work Surface Finish Poly Cutting Board
Capacity 42.2 cu. ft.
Sections 4
Access Type Doors and Drawers
Door Count 1
Drawer Count 6
Shelf Count 2
Pan Size Full Size and 1/3 Size
Pan Capacity 5 Full Size, 1 1/3 Size
Cutting Board Width 19 in
Voltage 115 Volts
Amps 7.8 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 8 ft
Horsepower 1/2 HP
BTU 4,234 BTU/hr
Refrigerant Type R290 Hydrocarbon
Refrigeration Type Self-Contained
Refrigeration Location Side Mounted
Temperature Range 36°–38°F
Defrost Adaptive
Caster Size 3 in
Braked Casters 2

Description

Beverage Air DPD119HC-6 is a four-section refrigerated pizza prep table with 42.2 cu. ft. of capacity, six drawers, one door, and a refrigerated pan rail.

  • Stainless steel front, sides, and top with a corrosion-resistant aluminum interior liner.
  • Removable 19-inch cutting board and pan rail capacity for five full-size and one 1/3-size pan.
  • Side-mounted self-contained refrigeration uses R290 hydrocarbon refrigerant and is specified for 36°–38°F.
  • Includes two epoxy-coated steel wire shelves and a 115 V, NEMA 5-15P electrical connection with an 8-ft cord.

Overall Dimensions:

119.0"W x 37.0"D x 53.13"H

Product Weight:

703.0 lb

Four-Section Storage

Provides 42.2 cu. ft. of refrigerated capacity across four sections.

Combination Drawer and Door Access

Configured with six drawers and one door.

Refrigerated Pan Rail

Top capacity is specified for five full-size pans and one 1/3-size pan; pans are not included.

Removable Cutting Board

Includes a removable 19-inch cutting board.

Stainless Steel Construction

The front, sides, top, doors, drawers, and grille are stainless steel; the interior liner is corrosion-resistant aluminum.

Self-Contained Refrigeration

Side-mounted refrigeration uses R290 hydrocarbon refrigerant and is specified for 36°–38°F.

Wire Shelving

Includes two epoxy-coated steel wire shelves.

Caster Base

Specified with 3-inch casters, including two with brakes.

Frequently Asked Questions

The listed net capacity is 42.2 cu. ft.
It has six drawers and one door.
The pan rail has capacity for five full-size pans and one 1/3-size pan. Pans are not included.
The listed dimensions are 119 in wide, 37 in deep, and 53.13 in high.
The unit is specified at 115 Volts, 7.8 Amps, 60 Hz, single phase, with a NEMA 5-15P plug and 8-ft cord.
Yes. The refrigeration system is self-contained and side mounted, using R290 hydrocarbon refrigerant.
Warranty documentation specifies seven-year parts and labor coverage and a seven-year compressor parts warranty, subject to the stated eligibility requirements and exclusions.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030