Refrigeration X XPR-67-N Two-Door Pizza Prep Table, 67-1/8"W, Self-Contained Side-Mount Refrigeration, Poly Cutting Board

SKU: XPR-67-N
$2,827.20
/each
Enter ZIP for a shipping estimate

Want to speak to an expert?

The XPR-67-N is a two-section pizza prep table with 20 cu. ft. of net capacity, two solid swing doors, and self-contained, side-mount refrigeration.

It has a 19-1/4-inch-deep, 1/2-inch-thick HDPE cutting board, 1/3-size 6-inch-deep condiment pans, and four PE-coated wire shelves.

  • R-290 hydrocarbon refrigerant with a 3/8 HP compressor
  • 115 V, 60 Hz, single-phase electrical connection with a NEMA 5-15P plug
  • Stainless steel door, aluminum exterior sides, and galvanized steel top, bottom, and back
  • Four-inch swivel casters with locks on the front set

Overall Dimensions:

67.12"W x 32.25"D x 36.5"H

Self-contained refrigeration

The refrigeration system is self-contained and uses a side-mount compressor.

R-290 refrigerant

The unit uses R-290 hydrocarbon refrigerant.

HDPE cutting board

The cutting board is 19-1/4 inches deep and 1/2 inch thick.

Pan and shelf storage

The unit includes 1/3-size, 6-inch-deep condiment pans and four PE-coated wire shelves.

Two solid doors

Two solid swing doors provide access to the refrigerated compartment.

Cabinet construction

The door is stainless steel, the exterior sides are aluminum, and the top, bottom, and back are galvanized steel.

Electrical connection

The unit operates at 115 V, 60 Hz, single phase, draws 4.2 A, and uses a NEMA 5-15P plug.

Caster set

Four-inch swivel casters are included, with locks on the front set.

Product type Pizza prep table
Sections 2 sections
Net capacity 20 cu. ft.
Doors 2 solid swing doors
Shelves 4 PE-coated wire shelves
Cutting board 19-1/4 in. deep x 1/2 in. thick HDPE
Included pan format 1/3 size, 6 in. deep condiment pans
Refrigeration system Self-contained
Compressor location Side mount
Compressor 3/8 HP
Refrigerant R-290 hydrocarbon
Temperature range 33°F to 41°F
Exterior construction Stainless steel door; aluminum exterior sides; galvanized steel top, bottom, and back
Insulation High-density, CFC-free polyurethane, foamed in place
Voltage 115 V
Frequency 60 Hz
Phase Single phase
Full-load amperage 4.2 A
Plug type NEMA 5-15P
Caster specification 4 in. diameter swivel casters with locks on the front set
Dimension notes Depth excludes 3-1/2 in. for the cutting board and 1 in. for rear spacers; height excludes 5-7/8 in. for caster height

Certifications & Compliance

Certified badge of ETL Listed
ETL Listed

Warranty & Protection

2-year parts and labor warranty plus an additional 3-year compressor warranty.

Frequently Asked Questions

Yes. The XPR-67-N uses a self-contained refrigeration system with a side-mount compressor.
It operates at 115 V, 60 Hz, single phase, draws 4.2 A, and uses a NEMA 5-15P plug.
It has a 19-1/4-inch-deep, 1/2-inch-thick HDPE cutting board.
The documentation specifies 2 years of parts and labor coverage plus an additional 3-year warranty on the compressor. It also marks the compressor warranty as 5 years in the U.S.A.
The overall dimensions are 67-1/8 inches wide by 32-1/4 inches deep by 36-1/2 inches high. The stated depth excludes the cutting board and rear spacers, and the stated height excludes caster height.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.