Vulcan

Vulcan Heavy Duty Deep Countertop Gas Griddle, 72-Inch x 30-Inch Cooking Surface, 162,000 BTU

SKU: 972RX-30
$20,034.00
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Vulcan Heavy Duty Deep Countertop Gas Griddle, 72-Inch x 30-Inch Cooking Surface, 162,000 BTU

Low Profile, 1-Inch Polished Steel Plate

Built for high-volume cooklines, this deep 72-inch griddle pairs six burners and zone-by-zone thermostat control with a thick steel plate for dependable heat.

  • 72-Inch x 30-Inch deep cooking surface supports high-volume service.
  • 1-inch polished steel plate promotes even heat transfer and durable daily use.
  • Six 27,000 BTU burners deliver 162,000 BTU total output.
  • Embedded snap-action thermostats control heat in 12-inch zones from 200°F to 550°F.
  • Stainless steel front and sides with a low-profile design fit busy cooklines.
  • Front grease trough, welded grease gutter/chute, and dual grease drawers simplify cleanup.
  • Dual manual/electric ignition, pilot safety, and a front shut-off valve help with safe operation.

Overall Dimensions:

72.0"W x 37.5"D x 15.25"H

Product Weight:

790.0 lb

1-Inch Polished Steel Plate

Heavy-duty smooth plate is built for even heat transfer and long service life.

72-Inch x 30-Inch Deep Cooking Surface

Large, deep cooking area supports high-volume production across the line.

Six High-Output Burners

One 27,000 BTU/hr burner per 12 inches of width provides 162,000 BTU total.

Thermostatic Heat Zones

Embedded mechanical snap-action thermostats provide independent zone control and adjust from 200°F to 550°F.

Dual Ignition and Pilot Safety

Manual/electric ignition is paired with millivolt pilot safety that shuts off gas if the pilot extinguishes.

Front Manifold Gas Shut-Off Valve

Front-access shut-off valve simplifies service and quick gas shutdown.

Stainless Steel Low-Profile Body

Stainless steel front and sides with a compact low-profile design and 4-inch adjustable legs.

Grease Management System

Front grease trough, welded gutter/chute, and dual grease drawers help contain drippings and speed cleanup.

120V Ignition Circuit

Single-phase ignition circuit uses a 120V connection with an 8-foot cord and NEMA 5-15 USA plug.

Type Heavy Duty Gas Griddle
Style Low Profile
Installation Type Countertop
Material Stainless Steel
Plate Finish Polished Steel
Controls Mechanical Snap Action Thermostat
Temperature Range 200°F to 550°F
Cooking Surface Width 72 Inches
Cooking Surface Depth 30 Inches
Plate Thickness 1 Inch
Burners 6
BTU 162,000 BTU
Gas Connection Size 3/4 Inch
Voltage 120 Volts
Amps 1 Amp
Hertz 50/60 Hz
Phase 1-Phase
Plug Type NEMA 5-15 USA Plug
Cord Length 8 Feet
Grease Drawers 2
Shipping Width 72 Inches
Shipping Depth 38 Inches
Shipping Height 16 Inches
Shipping Weight 790 lb.
Selling Unit Each
Units Per Case 1

Frequently Asked Questions

This model has a 72-inch wide by 30-inch deep cooking surface.
It delivers 162,000 BTU total from six burners, with one burner for every 12 inches of width.
It uses embedded mechanical snap-action thermostats with zone control and a 200°F to 550°F temperature range.
The unit uses a supplied gas pressure regulator, with natural gas set at 4.0 inches W.C. or propane at 10.0 inches W.C., and it has a 120V, 50/60Hz, 1 amp single-phase ignition circuit with a NEMA 5-15 USA plug.
The unit is for commercial installation only and requires 6 inches of clearance at both sides and rear to combustibles, plus 4 inches of bottom clearance.
Listed accessories include a plate rail, condiment rail, cutting board, 6-inch stainless steel legs, griddle banking strip, equipment stand, and integrated stand.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.