Vollrath 3647260 Steam Tables & Food Wells
Vollrath 3647260 Steam Tables & Food Wells is backordered and will ship as soon as it is back in stock.
Documents
Related Searches
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.
Description
Vollrath Two-Well Drop-In Hot Food Well – Auto-Fill, 240 V
625 W per well • Infinite controls • NEMA 6-15P plugKeep soups, sauces and entrées at perfect serving temperature with this Made-in-USA Vollrath two-well hot module. Designed for top-mount installation, the unit arrives pre-wired with a cord and plug—no hard-wiring, onsite brazing or extra drain plumbing required.
Why You’ll Love It
- Two individual 12" × 20" (full-size) 20-gauge stainless wells—each fully insulated for maximum heat retention.
- Wet operation with automatic water level control; simply connect to a ¼" water line and the wells refill themselves.
- 1" copper manifold drain with individual ball-valve shut-offs plus a master manifold shut-off for fast, mess-free emptying.
- Separate infinite heat controls and power indicator lights for each well, mounted on a stainless control panel with a 4' tether for flexible placement.
- Drip-free 18-gauge stainless top flange for a clean, professional counter finish.
- Zero-clearance, top-mount design with included positioning clips for counters up to 3" (7.6 cm) thick—install in minutes.
- Accepts pans up to 6" (15.2 cm) deep; adapter bars recommended for fractional pans.
- NSF 4 and cULus listed for safe, reliable commercial use.
At-a-Glance Specs
Wells | 2 × 12" × 20" (full-size), wet operation only |
---|---|
Total Wattage | 1,250 W (625 W per well) |
Electrical | 240 V / 60 Hz / 1-ph, 5.2 A, cord & NEMA 6-15P plug |
Controls | Individual infinite rotary dials with pilot lights |
Overall Dimensions | 28 ¼" W × 26" D × 21 ½" H (71.8 × 66 × 54.6 cm) |
Counter Cut-out | 27 ½" W × 25 ¼" D (69.9 × 64.1 cm) – ⅞" corner radius required |
Construction | 18-ga stainless top, 20-ga drawn wells, 18-ga galvanized exterior housing |
Drain | 1" copper manifold with individual & master shut-offs |
Water Connection | ¼" NPT for auto-fill |
Certifications | NSF 4, cULus, Made in USA |
Installation Notes
- Indoor use only; room temperature & HVAC can affect holding temperature.
- Operate with water in wells to meet NSF performance standards.
- Cut-out must include a ⅞" (2.2 cm) corner radius.
- Do not modify the attached cord or plug—doing so voids warranty.
For complete warranty terms, visit vollrathfoodservice.com.