Vollrath

Vollrath Three-Well Modular Hot Drop-In Food Well with Marine-Grade 316 Stainless Steel Wells, Auto-Fill and Thermostatic Controls

SKU: 3640580HD
$4,237.10
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Vollrath Three-Well Modular Hot Drop-In Food Well with Marine-Grade 316 Stainless Steel Wells, Auto-Fill and Thermostatic Controls

Wet Operation Only, Full-Size 12 x 20 Pans, 208V, 1-Phase

Keep hot foods at serving temperature with a corrosion-resistant, wet-operation drop-in that combines auto-fill convenience, independent thermostatic control, and easy-install corded power.

  • Three insulated 20-gauge 316 stainless steel wells help resist corrosion and support even heat retention.
  • Wet-operation design is intended for moist heat holding; water is required for proper performance.
  • Auto-fill and individual thermostatic controls make temperature management and daily operation easier.
  • 1-inch copper manifold drain includes individual well shutoffs and a master manifold shutoff.
  • Includes a 6-foot cord with NEMA 6-15P plug, so hard-wiring is not required.
  • Accepts full-size and fractional pans up to 6 inches deep; mounting clips are included.
  • Stainless steel top, exterior housing, and drip-free flange support durability and easier cleanup.

Overall Dimensions:

41.5"W x 26.0"D x 21.5"H

Product Weight:

127.0 lb

Marine-Grade Insulated Wells

Three 20-gauge 316 stainless steel wells are insulated on all sides, including between each well, to help resist corrosion and maintain heat.

Auto-Fill Convenience

Built-in auto-fill helps keep the wet wells ready for service.

Individual Thermostatic Controls

Each well has its own thermostatic control and power indicator light mounted on a remote stainless steel control panel.

Wet Operation Only

This hot well is designed for moist-heat service, and water is required for even heating of food products.

1-Inch Copper Manifold Drain

The manifold drain includes individual well shutoffs and a master manifold shutoff for easier drainage management.

Corded, Plug-In Power

Supplied with a 6-foot cord and NEMA 6-15P plug; hard-wiring is not required.

Durable Stainless Construction

Features an 18-gauge stainless steel top, stainless steel exterior housing, drip-free flange, and included positioning clips.

Pan-Friendly Well Design

Accepts full-size and fractional pans up to 6 inches deep; adapter bars are recommended when using fractional pans.

Type Hot Food Well
Style Individual Pans
Installation Type Drop-In
Controls Thermostatic
Material Stainless Steel
Interior Finish 316 Stainless Steel
Finish Stainless Steel
Pan Capacity 3 Full-Size Pans
Pan Size 12 Inches x 20 Inches
Drain Connection Size 1 Inch
Cord Length 6 Feet
Voltage 208 Volts
Amps 9.0 Amps
Watts 1.875 kW
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 6-15P
Country of Origin USA
Selling Unit Each
Units Per Case 1
Shipping Width 42 Inches
Shipping Depth 26 Inches
Shipping Height 22 Inches
Shipping Weight 127 lb.

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified

Warranty & Protection

2-year warranty against defects in materials and workmanship

Frequently Asked Questions

Yes. It is a wet-operation unit, and the documentation states that water is required for even heating of the food product.
It accepts full-size and fractional pans up to 6 inches deep. Adapter bars are recommended when using fractional pans.
The unit is rated for 208V, 60 Hz, single-phase power, draws 9.0 amps, and uses a NEMA 6-15P plug.
The cutout size is 40-3/4 inches wide by 25-1/4 inches deep, and the cutout must have a 7/8-inch corner radius.
No. It includes a 6-foot cord with plug and does not require hard-wiring.
HD wells carry a 2-year warranty against defects in materials and workmanship.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.