Key specifications
- Phase
- 1-Phase
- Dimensions
- 70.5"W × 70.5"D × 90.0"H
- Type
- Walk-In Cooler
- Style
- Floorless
- Installation Type
- Floor Model
- Application
- Outdoor
Spec sheet
U.S. Cooler Fastcooler™ CO66NF.PA95 Outdoor Floorless Walk-In Cooler, 6 x 6 x 7 Ft 6 In, Remote Medium-Temperature Refrigeration
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Fastcooler CO66NF.PA95 is an outdoor floorless walk-in cooler with pre-assembled remote medium-temperature refrigeration.
- Nominal size: 6 x 6 x 7 feet 6 inches
- Listed dimensions: 70.5 inches wide x 70.5 inches deep x 90 inches high
- Walls and ceiling use 26-gauge stucco embossed galvalume steel panels.
- Panels use 4-inch extruded polystyrene insulation and cam-lock assembly.
- Includes a 34 x 76-inch door and vinyl rain roof.
- Refrigeration is specified at 35°F with R448A refrigerant.
Overall Dimensions:
70.5"W x 70.5"D x 90.0"HProduct Weight:
1036.0 lbFloorless Design
The walk-in is specified without a floor.
Outdoor Installation
The cooler is specified for outdoor installation and includes a vinyl rain roof.
Panel Construction
Wall and ceiling panels use 26-gauge stucco embossed galvalume steel.
Insulation
Panels use 4-inch extruded polystyrene insulation.
Cam-Lock Assembly
The modular panels use cam-lock assembly.
Remote Refrigeration
The pre-assembled refrigeration package is remote, medium temperature, and air cooled.
Door
The cooler includes a 34 x 76-inch door.
Electrical Specification
The listed refrigeration specification is 208/230 volts, 60 Hz, single-phase, and 0.5 HP.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.