Key specifications
- Phase
- 1-Phase
- Dimensions
- 70.5"W × 94.0"D × 90.0"H
- Type
- Walk-In Cooler
- Style
- Indoor
- Installation Type
- Floor Model
- Material
- Galvalume Steel
Spec sheet
U.S. Cooler Fastcooler™ CI68NF.PA85 Indoor Walk-In Cooler with Insulated Floor, Galvalume Panels, Remote Medium-Temp Refrigeration
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Fastcooler CI68NF.PA85 is an indoor walk-in cooler with an insulated floor and 26-gauge stucco-embossed galvalume steel wall and ceiling panels.
It uses 4-inch extruded polystyrene insulation with cam-lock assembly. The pre-assembled remote medium-temperature refrigeration system is specified for +35°F operation and uses R448A refrigerant.
- Assembled dimensions: 70.5 inches wide by 94 inches deep by 90 inches high
- 34-inch by 76-inch door
- 208-230 volts, 60 Hz, single phase
- NSF and UL certified
Overall Dimensions:
70.5"W x 94.0"D x 90.0"HProduct Weight:
1096.0 lbInsulated Floor
The walk-in cooler is specified with an insulated floor.
Galvalume Steel Panels
Wall and ceiling panels use 26-gauge stucco-embossed galvalume steel.
Extruded Polystyrene Insulation
The panels use 4-inch extruded polystyrene insulation.
Cam-Lock Assembly
Panel construction uses cam-lock assembly.
Remote Refrigeration
A pre-assembled remote medium-temperature refrigeration system is specified for +35°F operation with R448A refrigerant.
Door Size
The specified door measures 34 inches by 76 inches.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.