Key specifications
- Phase
- 1-Phase
- Dimensions
- 117.5"W × 141.0"D × 90.0"H
- Type
- Walk-In Cooler
- Installation Type
- Floor Model
- Material
- Galvalume Steel
- Finish
- Galvalume
Spec sheet
U.S. Cooler Fastcooler™ CI1012FL.PA95 Indoor Walk-In Cooler, 9'-9 1/2" x 11'-9" x 7'-6", Galvalume, 4" Insulation, Remote Refrigeration
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The U.S. Cooler Fastcooler CI1012FL.PA95 is an indoor walk-in cooler measuring 117.5 inches wide by 141 inches deep by 90 inches high. It has insulated floor, wall, and ceiling panels made with 26-gauge stucco embossed galvalume steel, 4-inch extruded polystyrene insulation, cam-lock assembly, a 34-inch by 76-inch door, and pre-assembled remote medium-temperature outdoor refrigeration.
- Insulated floor, wall, and ceiling panels
- Remote medium-temperature refrigeration specified at +35°F
- 208-230 volt, 60 Hz, single-phase electrical specification
- NSF and UL approved
Overall Dimensions:
117.5"W x 141.0"D x 90.0"HProduct Weight:
2260.0 lbInsulated panel construction
Wall, ceiling, and floor panels use 4-inch extruded polystyrene insulation.
Galvalume steel panels
Interior and exterior metal panels are specified as 26-gauge stucco embossed galvalume.
Cam-lock assembly
Modular panels are assembled with cam-action locking devices.
Remote refrigeration
Pre-assembled remote medium-temperature outdoor refrigeration is specified at +35°F.
Standard passage door
The specified door measures 34 inches by 76 inches.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.