U.S. Cooler

Fastcooler Indoor Walk-In Cooler, 10' x 12' x 7'-6", With Floor and Remote Medium-Temperature Refrigeration

SKU: CI1012FL.PA110
$20,457.89
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Fastcooler Indoor Walk-In Cooler, 10' x 12' x 7'-6", With Floor and Remote Medium-Temperature Refrigeration

Galvalume Panels, 4" Extruded Insulation, 34" x 76" Passage Door

A factory-built indoor walk-in cooler with insulated galvalume panels and pre-assembled remote refrigeration for dependable medium-temperature storage.

  • Nominal 10' x 12' indoor walk-in cooler with a full insulated floor
  • 26-gauge stucco embossed galvalume steel panels with 4" extruded insulation
  • Cam-lock panel assembly and factory test assembly help speed installation
  • Standard 34" x 76" door includes a closer, vapor-proof light, thermometer, and lock override
  • Pre-assembled remote medium-temperature refrigeration holds +35°F
  • NSF and UL approved construction rated for 110°F average ambient outdoor conditions

Overall Dimensions:

117.5"W x 141.0"D x 90.0"H

Product Weight:

2247.0 lb

Factory-Test Assembled Modular Panels

Prefabricated, precision-formed panels are test assembled at the factory for accurate, rapid field assembly.

Stucco Embossed Galvalume Construction

Interior and exterior metal skins use 26-gauge stucco embossed galvalume steel for durable cold-room construction.

4-Inch Extruded Insulation

Rigid 4-inch extruded polystyrene insulation helps maintain efficient cooler performance.

Cam-Action Locking Assembly

Cam-lock connections are operable from inside the walk-in and are designed for tight, secure panel joints.

Insulated Floor Included

This model includes insulated floor, wall, and ceiling panels for a complete walk-in enclosure.

Standard Passage Door

The standard 34" x 76" door is flush mounted and includes a door closer, one pre-wired vapor-proof light fixture, a light switch with pilot light, a dial thermometer, manual internal lock override, chrome-plated cam lift hinges, and chrome-plated door latches with strike.

Pre-Assembled Remote Medium-Temperature Refrigeration

Includes a pre-assembled remote outdoor refrigeration system using R448A refrigerant, rated at 1-1/2 HP and 208-230V/60/1-phase.

NSF and UL Approved

Construction is approved to NSF and UL standards and is rated for 110°F average ambient outdoor temperature.

Type Walk-In Cooler
Style With Floor
Installation Type Built-In
Material Steel
Finish Stucco Embossed Galvalume
Refrigeration Type Remote Medium Temperature
Refrigerant Type R448A
Temperature Range +35°F
Horsepower 1-1/2 HP
Voltage 208-230 Volts
Phase 1-Phase
Hertz 60 Hz
Selling Unit Each
Units Per Case 1
Country of Origin USA
Shipping Width 118 Inches
Shipping Depth 141 Inches
Shipping Height 90 Inches
Shipping Weight 2247 lb.

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified
Certified badge of UL Certified
UL Certified

Warranty & Protection

10-year limited warranty on walk-in panels; 1-year on hardware and refrigeration equipment.

Frequently Asked Questions

Yes. This model is specified for indoor installation.
Yes. It includes insulated floor, wall, and ceiling panels.
The standard passage door is 34" x 76"; alternate sizes are available upon request.
It includes a pre-assembled remote medium-temperature outdoor refrigeration system rated for +35°F and 110°F average ambient outdoor temperature.
The panels use 26-gauge stucco embossed galvalume steel with 4" extruded insulation.
Walk-in panels carry a 10-year limited warranty. Hardware carries a 1-year warranty, and refrigeration equipment carries a 1-year factory warranty; optional extended compressor and labor warranties are also available.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.