Key specifications
- Amps
- 13 Amps
- Phase
- 1-Phase
- Dimensions
- 71.88"W × 33.75"D × 44.25"H
- Type
- Refrigerated Display Case
- Style
- Horizontal Open
- Installation Type
- Drop-In
Spec sheet
Turbo Air TOM-72L-UFD-W(B)-2SI-N Drop-In Horizontal Open Refrigerated Display Case, 71-7/8 in. W, 15.8 Cu. Ft., Self-Contained
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Turbo Air TOM-72L-UFD-W(B)-2SI-N is a low-profile, drop-in horizontal open refrigerated display case with 15.8 cu. ft. of self-contained refrigeration.
It includes two glass shelves plus a deck, a stainless steel interior, tempered glass front shield and side walls, rear sliding glass doors, LED interior lighting, and a night cover.
- Self-cleaning condenser with front air intake and rear air discharge
- Solar-powered digital thermometer and digital electronic thermostat with defrost control
- R-290 hydrocarbon refrigerant
- 220 Volts, 60 Hz, single-phase operation with a NEMA 6-20P plug
Overall Dimensions:
71.88"W x 33.75"D x 44.25"HProduct Weight:
835.0 lbSelf-Cleaning Condenser
A fine mesh filter at the front of the condenser catches dust, while a rotating brush moves daily to remove buildup.
Open Display Design
Low-profile open-top design with front air intake and rear air discharge.
Glass Display Panels
Tempered glass front shield and side walls with rear sliding glass doors.
Shelving
One tier with two glass shelves plus a deck.
Self-Contained Refrigeration
Self-contained refrigeration system using R-290 hydrocarbon refrigerant.
Controls and Lighting
Solar-powered digital thermometer, digital electronic thermostat with defrost control, and LED interior lighting.
Night Cover
Includes a night cover.
Plug-In Installation
Simple plug-in installation with no plumbing required.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.