Key specifications
- Amps
- 13 Amps
- Phase
- 1-Phase
- Dimensions
- 70.75"W × 33.0"D × 53.13"H
- Type
- Open Display Merchandiser
- Style
- Low Profile
- Installation Type
- Floor Model
Turbo Air TOM-72L-UF-S-3S-N 70.75-Inch Horizontal Open Display Merchandiser, 23.4 Cu. Ft., Self-Contained, Stainless Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Turbo Air TOM-72L-UF-S-3S-N is a low-profile horizontal open display merchandiser with 23.4 cu. ft. of capacity, self-contained refrigeration, and stainless steel interior and exterior.
It features two tiers with four glass shelves plus a deck, tempered glass front and side panels, LED interior lighting, a digital electronic thermostat with defrost control, a solar digital thermometer, and an included night cover.
- Self-cleaning condenser
- Front air intake and rear air discharge
- R-290 hydrocarbon refrigerant
- 220-Volt, single-phase electrical configuration with a NEMA 6-20P plug
Overall Dimensions:
70.75"W x 33.0"D x 53.13"HProduct Weight:
854.0 lbSelf-Cleaning Condenser
A fine-mesh filter and daily rotating brush help remove condenser dust buildup.
Open Display Configuration
The case provides two tiers with four glass shelves and a deck for product display.
Self-Contained Refrigeration
The refrigeration system is self-contained and supports plug-in installation without plumbing.
Tempered Glass Panels
The front shield and side panels use tempered glass.
Digital Controls
A digital electronic thermostat provides defrost control, with a solar digital thermometer.
LED Interior Lighting
LED lighting illuminates the interior display area.
Airflow Configuration
Air enters through the front and discharges through the rear.
Night Cover
A night cover is included.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.