Key specifications
- Amps
- 15.5 Amps
- Phase
- 1-Phase
- Dimensions
- 50.88"W × 27.13"D × 60.88"H
- Type
- Open Display Merchandiser
- Style
- Mid-Height
- Installation Type
- Floor Model
Spec sheet
Turbo Air TOM-50MS-N Mid-Height Vertical Open Display Merchandiser, 12.3 Cu. Ft., Stainless Steel, Self-Contained
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Turbo Air TOM-50MS-N is a mid-height vertical open display merchandiser with 12.3 cu. ft. of capacity. Its self-contained, plug-in refrigeration system provides an open-front display with a tempered glass front shield and side walls.
The unit includes three adjustable stainless steel shelves, LED lighting under each shelf, a hot gas condensate system, and an energy-saving night curtain. Stainless steel interior and exterior construction, front air intake, and rear air discharge are standard.
- R-290 hydrocarbon refrigerant
- Self-cleaning condenser device
- 115 Volts, 60 Hz, 1-Phase, 15.5 Amps
- NEMA 5-20P plug
Overall Dimensions:
50.88"W x 27.13"D x 60.88"HProduct Weight:
567.0 lbSelf-Cleaning Condenser
A fine mesh filter and rotating brush help remove condenser dust buildup daily.
Self-Contained Refrigeration
The plug-in system requires no plumbing.
Adjustable Shelves
Three stainless steel shelves adjust in 1-inch increments.
Tempered Glass Display
Tempered glass is used for the front shield and side walls.
LED Lighting
LED interior lights are positioned under each shelf.
Night Curtain
An energy-saving night curtain is standard.
Airflow Design
Front air intake and rear air discharge support cabinet airflow.
Hot Gas Condensate System
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.