Key specifications
- Amps
- 7.3 Amps
- Phase
- 1-Phase
- Dimensions
- 50.88"W × 34.75"D × 46.5"H
- Type
- Refrigerated Merchandiser
- Style
- Low Profile
- Installation Type
- Floor Model
Spec sheet
Turbo Air TOM-50LS-N 9.8 Cu. Ft. Low-Profile Horizontal Open-Front Refrigerated Merchandiser, Stainless Steel, Self-Contained
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Turbo Air TOM-50LS-N is a low-profile horizontal open display merchandiser with a 9.8 cu. ft. capacity and an open front.
It features a stainless steel interior and exterior, tempered glass front shield and side walls, one solid shelf, and LED interior lighting.
The self-contained refrigeration system uses R290 hydrocarbon refrigerant and includes a self-cleaning condenser, solar-powered digital thermometer, and digital electronic thermostat with defrost control.
- Electrical: 115 Volts, 60 Hz, 1-phase, 7.3 Amps, NEMA 5-15P
- Compressor: 3/4 HP
- Dimensions: 50.88 in. W x 34.75 in. D x 46.5 in. H
Overall Dimensions:
50.88"W x 34.75"D x 46.5"HProduct Weight:
505.0 lbSelf-Cleaning Condenser
A fine mesh filter and daily rotating brush are designed to remove condenser buildup.
Open-Front Display
The unit has an open front with a tempered glass front shield and side walls.
Stainless Steel Construction
The interior and exterior are stainless steel.
LED Interior Lighting
LED lighting is provided under the shelf.
Self-Contained Refrigeration
The patented self-contained system requires no plumbing.
Digital Temperature Control
Includes a solar-powered digital thermometer and digital electronic thermostat with defrost control.
Solid Shelf
Includes one stainless steel solid shelf.
Anti-Corrosion Evaporator
The evaporator has an anti-corrosion coating.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.