Key specifications
- Amps
- 13.6 Amps
- Phase
- 1-Phase
- Dimensions
- 47.88"W × 33.75"D × 37.75"H
- Type
- Refrigerated Display Case
- Style
- Open
- Installation Type
- Drop-In
Spec sheet
Turbo Air TOM-48L-UFD-S-1SI-N Low-Profile Drop-In Horizontal Open Refrigerated Display Case, 6.3 Cu. Ft., Deck Only, Stainless Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Turbo Air TOM-48L-UFD-S-1SI-N is a low-profile, drop-in horizontal open refrigerated display case with 6.3 cu. ft. capacity and a deck-only configuration.
It features stainless steel interior and exterior construction, a tempered glass front shield and side walls, rear sliding glass doors, and LED interior lighting.
Self-contained refrigeration uses R290 hydrocarbon refrigerant and a self-cleaning condenser. A digital electronic thermostat with defrost control and a solar-powered digital thermometer are included. A night cover is also included.
- 115 Volts, 13.6 Amps, 60 Hz, 1-Phase
- NEMA 5-20P plug with 9 7/8 ft. cord
- Front air intake and rear air discharge
Overall Dimensions:
47.88"W x 33.75"D x 37.75"HProduct Weight:
520.0 lbLow-Profile Drop-In Design
Designed as a low-profile, drop-in horizontal open display case.
Self-Cleaning Condenser
A fine mesh filter and daily rotating brush remove condenser buildup.
Glass Display and Access
Tempered glass front shield and side walls provide the display enclosure, while rear sliding glass doors support product loading and unloading.
Temperature Controls
Includes a digital electronic thermostat with defrost control and a solar-powered digital thermometer.
Self-Contained Refrigeration
Uses self-contained refrigeration with R290 hydrocarbon refrigerant.
LED Interior Lighting
LED lighting is provided inside the display case.
Night Cover
A night cover is included.
Airflow
Front air intake and rear air discharge are specified for the case.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.