Key specifications
- Amps
- 4.6 Amps
- Phase
- 1-Phase
- Dimensions
- 59.75"W × 14.12"D × 11.5"H
- Type
- Sushi Case
- Style
- Refrigerated
- Installation Type
- Countertop
Spec sheet
Turbo Air SAK-60R-N 59-3/4-Inch Countertop Refrigerated Sushi Case, 304 Stainless Steel, Self-Contained, Right-Side Compressor
- Right
- Left
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Turbo Air SAK-60R-N is a countertop refrigerated sushi case with a 1.7 cu. ft. capacity and a 304 stainless steel exterior body and food plates.
Its self-contained refrigeration system uses R-290 hydrocarbon refrigerant, with the compressor located on the right from the customer side view. The case has angled-down top glass, four tempered glass rear sliding doors with handles, and five bottom shelves.
The unit operates at 115 volts, 60 Hz, single phase, and 4.6 amps with a NEMA 5-15P plug.
Overall Dimensions:
59.75"W x 14.12"D x 11.5"HProduct Weight:
102.0 lbSelf-Contained Refrigeration
The unit uses a self-contained refrigeration system with R-290 hydrocarbon refrigerant.
Right-Side Compressor
The compressor is located on the right from the customer side view.
304 Stainless Steel Construction
The exterior body and food plates are made of 304 stainless steel.
Angled-Down Top Glass
The top front glass angles down.
Tempered Glass Sliding Doors
Four rear sliding doors use tempered glass and handles.
Bottom Shelves
The case has five bottom shelves.
Drain
The case has a 1-inch drain.
Operating Conditions
The specified ambient temperature range is 50°F to 80°F, with a saturation temperature of 39°F.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.