Key specifications
- Dimensions
- 84.0"W × 30.0"D × 43.0"H
- Product type
- Clean dishtable
- Configuration
- L-shaped corner
- Operation direction
- Left to right
- Machine-to-corner
- 60 in
- Corner-to-end
- 84 in
Spec sheet
Titan Stainless 7CDT-R-LS-14 Corner Clean Dish Table, Left-to-Right, 60" Machine-to-Corner, 84" Corner-to-End, 14-Gauge 300-Series Stainless Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Titan Stainless 7CDT-R-LS-14 is an L-shaped corner clean dishtable with left-to-right operation, a landing ledge, and stainless steel construction.
- 60-inch machine-to-corner dimension and 84-inch corner-to-end dimension.
- 14-gauge 300-series stainless steel top.
- Stainless steel H-frame legs.
- Overall dimensions are 84 inches wide by 30 inches deep by 43 inches high.
Overall Dimensions:
84.0"W x 30.0"D x 43.0"HProduct Weight:
300.0 lbCorner configuration
L-shaped design for a corner installation.
Left-to-right operation
Configured for left-to-right operation.
Landing ledge
Includes a landing ledge.
Stainless steel top
Built with a 14-gauge 300-series stainless steel top.
Stainless steel H-frame legs
Uses stainless steel H-frame legs.
Machine-to-corner dimension
Measures 60 inches from the machine to the corner.
Corner-to-end dimension
Measures 84 inches from the corner to the end.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.