Key specifications
- Dimensions
- 72.0"W × 30.0"D × 43.0"H
- Product type
- Soiled dishtable
- Shape
- Corner
- Operation
- Left to right
- End-to-corner length
- 60 in
- Corner-to-machine length
- 72 in
Spec sheet
Titan Stainless 6SDT-L-CS-14 Corner Soiled Dish Table, Left-to-Right, 14-Gauge 300-Series Stainless Steel, 60" End x 72" Machine
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
6SDT-L-CS-14 is a corner soiled dish table configured for left-to-right operation, with a 60-inch end-to-corner section and a 72-inch corner-to-machine section.
The table has a 14-gauge 300-series stainless steel top, a 20-inch by 20-inch by 8-inch-deep pre-rinse sink, a backsplash, and stainless steel H-frame legs.
- Overall dimensions: 72 inches wide by 30 inches deep by 43 inches high.
- Product weight: 269 pounds.
- NSF certification is specified.
- The cutsheet states that plumbing components are not provided.
Overall Dimensions:
72.0"W x 30.0"D x 43.0"HProduct Weight:
269.0 lbCorner configuration
Provides a 60-inch end-to-corner section and a 72-inch corner-to-machine section.
Left-to-right operation
Configured for left-to-right operation.
Stainless steel top
The top is specified as 14-gauge, 300-series stainless steel.
Pre-rinse sink
Includes a 20-inch by 20-inch by 8-inch-deep pre-rinse sink.
Backsplash
A backsplash is specified for the table.
Stainless steel H-frame legs
The table uses stainless steel H-frame legs.
NSF certification
NSF certification is specified for the product.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.