Key specifications

Amps
13.4 Amps
Phase
3-Phase
Dimensions
35.5"W × 41.5"D × 82.0"H
Type
Door-Type Dishwasher
Style
Tall
Installation Type
Floor Model
Spec sheet
Stero SKU: SD3T-3

Stero SD3T-3 Tall High-Temperature Door-Type Dishwasher, 27-Inch Opening, Straight/Corner, 58 Racks/Hour, No Booster

$36,322.80
/each
Estimated to ship in 16–19 business days
Electrical
Booster
Included: Stero warranty One year from initial startup or 18 months from factory shipment, whichever comes first

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $3,360/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Door-Type Dishwasher
Style Tall
Installation Type Floor Model
Material Stainless Steel
Capacity 58 Racks/Hour
Door Opening 27 Inches
Voltage 480 Volts
Amps 13.4 Amps
Hertz 60 Hz
Phase 3-Phase
Booster Heater None
Sanitizing Type High Temperature
Supply Water Temperature 180°F Minimum
Final Rinse Temperature 180°F
Heating Power 5 kW
Wash Motor Power 2 HP
Wash Cycle Adjustable
Controls Digital Control Status
Operation Configuration Straight-Through or Corner
Water Consumption 0.85 Gallons/Rack
Rinse Flow Rate 5.1 Gallons/Minute
Exhaust Requirement 450 CFM

Description

The Stero SD3T-3 is a tall door-type dishwasher with a 27-inch door opening, high-temperature sanitizing, and straight-through or corner operation. It is rated for 58 racks per hour without a booster and requires 180°F supply water.

  • Stainless steel construction
  • Adjustable wash cycle with digital control status
  • Door-actuated start, automatic tank fill, and automatic drain closure
  • Interchangeable upper and lower wash and rinse arms
  • Pressure gauge and error notification included

Overall Dimensions:

35.5"W x 41.5"D x 82.0"H

Product Weight:

384.0 lb

High-Temperature Sanitizing

Requires 180°F minimum supply water and provides 180°F final rinse assurance.

Door-Type Design

Tall configuration with a 27-inch door opening.

Throughput

Rated for 58 racks per hour.

Straight-Through or Corner Operation

The machine can be operated in a straight-through or corner layout.

Controls and Automation

Includes an adjustable wash cycle, digital control status, door-actuated start, automatic tank fill, and automatic drain closure.

Wash System

Upper and lower wash and rinse arms are interchangeable.

Monitoring

Includes a pressure gauge and error notification.

Construction

Stainless steel construction.

Frequently Asked Questions

No. This model is specified without a booster and requires 180°F minimum supply water for high-temperature sanitizing.
The SD3T-3 is rated for 58 racks per hour.
Yes. It supports both straight-through and corner operation.
It is specified for 480 Volts, 60 Hz, 3-Phase service and has a rated current of 13.4 Amps.
The listed product dimensions are 29.75 inches wide, 34 inches deep, and 77.5 inches high.
The door opening is 27 inches high.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030