Key specifications
- Construction
- All-welded 304 stainless steel
- Dimensions
- 44.0"W × 30.0"D × 37.0"H
- Product type
- Silverware sorting table
- Working height
- 34 in
- Edge profile
- 3 in bull-nosed raised edges on all four sides
- Base
- Open front
Spec sheet
Steril-Sil STE-44-BN 304 Stainless Steel Sorting Dish Table, 44" x 32", Open Front with Side and Rear Crossrails
- With Backsplash
- Without Backsplash
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Steril-Sil STE-44-BN is a silverware sorting table with a 34-inch working height and an open front for mobile soak sink storage.
- All-welded 304 stainless steel construction
- 3-inch bull-nosed raised edges on all four sides
- Crossrails on the sides and rear
- Integrated drain
- Four non-marking locking casters
- NSF approved and made in the USA
Overall Dimensions:
44.0"W x 30.0"D x 37.0"HProduct Weight:
170.0 lb304 stainless steel construction
All-welded construction made from 304 stainless steel.
Open front
The open front allows storage of a mobile soak sink below the table.
Bull-nosed raised edges
The table has 3-inch bull-nosed raised edges on all four sides.
Side and rear crossrails
Crossrails are provided on the sides and at the rear of the unit.
Drain
Includes a drain.
Locking casters
Includes four non-marking locking casters.
Working height
The working height is 34 inches.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.